PLATE-REACTION 6V2168 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 385-8731 Sleeve Installer Tool Kit 1 Note: Check all of the O-ring seals and the components for wear or for damage. Replace the components, if necessary. Lubricate all of the O-ring seals lightly with the lubricant that is being sealed. Clean all of the components with a cloth that is free of loose material (lint).
Illustration 1 g02714370Note: Do not lower the temperature of bearings (20).
Use Tooling (B) and a suitable press to install bearings (20) into pump body (19). The joint surfaces of the bearings must be 30 15 degrees from the centerline through the bearing bores. The joint surfaces must be toward Outlet Port (2). Make sure that the bearings are 1.50 0.25 mm (0.05906 0.00984 inch) below the