PLATE-PULLER 6V3141 - Caterpillar

Illustration 1 g00288822
Rotation of the pump is counterclockwise when the pump is viewed from the drive end.Lubricate the pump with oil before you operate the pump.Bench test requirements: SAE 10W oil must be stabilized at 52° 3°C (125° 5°F) before performing the test. (A) Torque converter scavenge section Minimum output ... 40 L/min (10.6 US gpm) Test pressure ... 345 kPa (50 psi) Test speed of pump ... 900 rpm (B) Torque converter charging section Minimum output ... 162 L/min (43 US gpm) Test pressure ... 1035 kPa (150 psi) Test speed of pump ... 900 rpm (C) Parking brake release section Minimum output ... 25 L/min (6.6 US gpm) Test pressure ... 4136 kPa (600 psi) Test speed of pump ... 900 rpm (1) Torque for the locknut on the pump drive gear ... 110 13 N m (81 9 lb ft) (2) Clearance between a new gear and a new cover ... 0.104 0.047 mm (0.0041 0.0019 inch) (3) Clearance between a new gear and a new body ... 0.163 0.038 mm (0.0064 0.0015 inch) (4) Clearance between a new gear and a new cover ... 0.081 0.026 mm (0.0032 0.0010 inch) (5) Dimensions of new shafts and of new pump bodies Diameter of the drive shafts and diameter of the driven shafts ... 31.742 0.005 mm (1.2497 0.0002 inch) Diameter of the bores in the pump body ... 31.786 0.008 mm (1.2514 0.0003 inch)