PLATE 6Y9432 - Caterpillar

TARGET="_parent">Differential and Final Drive Oil Level - Check
Drive Shaft Slip Joint - Lubricate
Engine Oil and Filter - Change
Engine Oil and Filter - Change
Fan Drive Bearing and Belt Adjusting Pulley - Lubricate
Frame and Body - Inspect
Front Wheel Oil - Inspect
Front Wheel Oil Level - Check
Tire Inflation - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Differential and Final Drive Oil Sample - Obtain
Front Wheel Oil Sample - Obtain
Hoist and Brake Tank Oil Sample - Obtain
Steering System Oil Sample - Obtain
Torque Converter and Transmission Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Breather (Hoist and Brake Tank) - Replace
Breather (Torque Converter and Transmission) - Replace
Cooling System Coolant Sample (Level 1) - Obtain
Differential and Final Drive Oil - Inspect
Engine Crankcase Breather - Clean
Frame - Clean/Inspect
Front Wheel Oil - Change
Fuel System Secondary Filter - Replace
Fuel System Water Separator Element - Replace
Fuel Tank Cap and Strainer - Clean
Oil Filter (Parking Brake Release) - Replace
Oil Filter (Power Train) - Replace
Oil Filter (Steering Pump Case Drain) - Replace
Oil Filter (Steering) - Replace
Screen (Transmission) - Clean
Suspension Cylinder - Check
Every 1000 Service Hours or 6 Months
Air Dryer Desiccant - Replace
Frame and Body Support Pads - Clean/Inspect
Hoist and Brake Tank Oil - Change
Rollover Protective Structure (ROPS) - Inspect
Seat Suspension - Inspect/Lubricate
Service Brakes - Inspect
Steering Linkage - Inspect
Steering System Oil - Change
Torque Converter and Transmission Oil - Change
Every 2000 Service Hours or 6 Months
Wheel (Front, Rear) - Inspect
Every 2000 Service Hours or 1 Year
Breather (Differential and Final Drive) - Replace
Differential Thrust Pin Clearance - Check
Differential and Final Drive Oil - Change
Every Year
Air Tank - Inspect
Cooling System Coolant Sample (Level 2) - Obtain
Refrigerant Dryer - Replace
Every 3000 Service Hours or 2 Years
Cooling System Pressure Cap - Clean/Replace
Engine Valve Lash and Bridge - Check
Engine Valve Rotators - Inspect
Radiator Core and Aftercooler - Clean
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 4000 Service Hours or 1 Year
Differential and Final Drive Oil - Change
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 6000 Service Hours or 4 Years
Cooling System Relief Valve - Clean
Cooling System Water Temperature Regulator - Replace
Engine Water Pump - Inspect
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Cooling System Coolant (ELC) - Change