PLATE 7J5651 - Caterpillar

Illustration 1 g03523356
(1) Monitoring system
(2) Hydraulic tank
(3) Piston pump
(4) Pump control valve
(5) Service brakes
(6) Control manifold
(7) Brake accumulators
(8) Service brake control
(9) Oil Cooler (brake and hydraulic fan) Braking and Hydraulic Fan System
The brake system consists of the following components:Monitoring System
Illustration 2 g03476516The monitoring system (1) is located in the operator console.Hydraulic Tank
Illustration 3 g03478339The service brakes use oil from the hydraulic system.Piston Pump (Brake)
Illustration 4 g03476520Piston pump (3) is connected to an output shaft of the transmission. This pump is the same pump that supplies oil for the fan system.Pump Control Valve
Illustration 5 g03476522The pump control valve (4) is located on the bottom of the piston pump (3).Service Brakes
Illustration 6 g03478396There is a service brake (5) in each of the four rear wheel groups.Control Manifold
Illustration 7 g03476525The control manifold (6) is located in the center of the machine. The control manifold (6) is just behind the engine and the flywheel housing.Brake Accumulator
Illustration 8 g03476454The brake accumulators (7) are mounted on the back of the cab.Service Brake Control
Illustration 9 g03576718
Cab side of the brake control group.
Illustration 10 g03478576
Steering control group has been removed for clarity.
(8) Front side of the brake control group. The service brake control (8) is located in the front of the cab.Parking Brake
Refer to the Power Train Systems Operation/Testing and Adjusting for information regarding the parking brake and parking brake components for your machine.Oil Cooler (Brake)
Illustration 11 g03476536The oil cooler (brake and hydraulic fan) (9) is located at the rear of the machine in front of the radiator.AWD Oil Cooler (Brake) (AWD)
Illustration 12 g03605456The oil cooler (brake and hydraulic fan) (9) is located at the rear of the machine near the radiator in front of the radiator.