PLATE-THRUST 7K1745 - Caterpillar

Introduction
This Special Instruction covers the installation procedure for 238-2485 Toggle Switch Gp on the models and applications listed above.Safety Section
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment . These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
238-2485 Toggle Switch Gp (- 02)
Item Qty Part No. Description
(1) 1 238-2478 Toggle Switch Gp
(1a) 1 7N-2353 Toggle Switch
(1b) 1 238-2479 Wiring Harness
(2) 1 259-4884 Bracket As
(3) 1 259-7180 Cover
(4) 3 9X-2042 Screw
Illustration 2 g06160503
Illustration 3 g03674589
Overview of the 238-2485 Toggle Switch Gp
(N1) Cab side panel.Installation Procedure
Illustration 4 g03674590
Close up of Area A
(B) Cab Harness "147 PU" "780 PU"
(1) 238-2478 Toggle Switch Gp
(2) 259-4884 Bracket As
(3) 259-7180 Cover
(4) 9X-2042 Screw
Remove four remaining pieces on mounting hole after knocking out the plug for the switch and make the length less than 1 mm (0.04 inch).
Illustration 5 g03674803
Close up of (1) 238-2478 Toggle Switch Gp
(C) Hex nut
(D) Internal tooth lock washer
(E) locking ring
(F) Hex nut
(1) 238-2478 Toggle Switch Gp
(2) 259-4884 Bracket As
Install parts in alphabetical order as shown.Note: Install switch with locking ring under the plate and the projection of the locking ring fit into the small plate hole.