PLATE 7U3696 - Caterpillar

Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-5000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
5001-8000 hrs,
49-72 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 1.0-hour job for Group 2
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 3*******
0-5000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
5001-8000 hrs,
49-72 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 1.0-hour job for Group 3
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Group Number 1
Rework Procedure on Harness:
Install two 204-1673 Straps between the magnet cable and thick harness, at both ends of the hole, at the front of the right side plate of the swing frame. Tie the thick harness and thin harness by two 7K-1181 Cable Straps next to the 204-1673 Strap. Refer to Images1.1.1, 1.1.2, and 1.1.3.
Image1.1.1
Image1.1.2
Image1.1.3
Group Number 3
Rework Procedure on Clip:
Replace the existing 8M-2773 with a new 4K-8864 Clip. Tighten the bolt on clip to a specified torque of 55 +/- 10 N.m. Refer to Image2.1.1.
Image2.1.1
Group Number 2
Rework Procedure on Harness and Clip:
Perform both Group 1 and Group 3.