PLATE-ROPS/ 7X2945 - Caterpillar

Illustration 1 g00739844
The filler plug is located on the right side of the rear axle. (1) Filler plug
Illustration 2 g00739845
The drain plug is located on the underside of the rear axle. (2) Drain plugOperate the machine for an adequate amount of time in order to warm the lubricant.Filler plug (1) and drain plug (2) are located under the machine on the rear axle.Note: Refer to the Operation and Maintenance Manual, "General Hazard Information" for information in containing fluid spillage.
Remove the dirt that is around filler plug (1) and around drain plug (2) .
Remove drain plug (2). Drain the lubricant into a suitable container.Note: Dispose of any used lubricant according to local regulations.
Clean drain plug (2) .
Inspect the O-ring seal. If damage or wear is noticed on the O-ring seal, replace the seal.
Install drain plug (2) .
Remove filler plug (1) .
Fill the axle with lubricant to the bottom of the filler plug opening. See Operation and Maintenance Manual, "Refill Capacities".
Clean filler plug (1) .
Inspect the O-ring seal. If damage or wear is noticed on the O-ring seal, replace the seal.
Install filler plug (1) .