PLATE-WEAR 7X5689 - Caterpillar

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
The following parts are adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers. Refer to Table 1 for the new part numbers.
Table 1
Required Parts
Item Qty New Part Number Part Name
1 2 289-5700 Grommet
2 2 7K-1181 Cable Strap The hoses on field machines are routed so as not to interfere with each other when assembled in facilities. The interference will not occur on the existed field machines. If having difficulty routing travel line hoses not to interfere with each other after removing and reassembling the hoses of the field machines, use the following procedure:
Illustration 1 g06354049
Travel lines near the swing drive
Illustration 2 g06354055
Grommets and straps routing the travel lines away from the swing drive
(1) 289-5700 Grommet
(2) 7K-1181 Cable Strap
Install 2 289-5700 Grommets on the travel line hoses, illustration 2, at places where the hoses are close to each other, illustration 1.
Tighten the grommets with 2 7K-1181 Cable Strap at once, illustration 2. Cut the extra straps after fixing the grommets.