PLATE ASSEM. 8D3715 - Caterpillar

Remove Procedure
Table 1
Required Tools
Tooling Part Number Part Description Qty
A 369-5916 Link Bracket 2 Start By:
Remove input drive shaft.
Remove steering pump.
Remove steering valve.
Remove secondary steering valve.
Illustration 1 g03487218
Underside of transmission
Disconnect hose assemblies (1) and (2).
Illustration 2 g03487537
Disconnect harness assembly (5). Disconnect tube assembly (3) from under block (4). Set block assembly (4) to the side. Remove hose assembly (3).
Disconnect hose assembly (7) and tube assembly (6).
Illustration 3 g03487736
Disconnect hose assembly (8) , (9) and (10).
Illustration 4 g03488020
Remove tube assembly (11). Disconnect tube assembly (12) from the hydraulic tank and remove. Disconnect harness assembly (13).
Illustration 5 g03488176
Underside of transmission
Illustration 6 g03488198
Disconnect hose assembly (14). Disconnect tube assembly (15).
Remove bolt (16). Set tube assembly (15) to the side.
Illustration 7 g03488200
Use suitable cribbing under rear output drive shaft (18). Remove bolts (17). Retract drive shaft (18) from transmission.
Illustration 8 g03488239
Right side of transmission
Disconnect grease lines (19).
Illustration 9 g03488248
Typical Example
Attach Tooling (A) and a suitable lifting device to transmission (20). The weight of transmission (20) is approximately 1497 kg (3300 lb).
Illustration 10 g03488258
Remove bolts (34) and mount (35). Repeat for the opposite side.
Illustration 11 g03488273
Remove bolts (36) and mount (37). Repeat for the opposite. Remove transmission (20). Installation Procedure
Install transmission (20) in the reverse order of removal.