PLATE 8D4861 - Caterpillar

Illustration 1 g06102357
Location of left-hand body rocker
Refer to Operation and Maintenance Manual, SEBU8406, "Prepare the Machine for Maintenance".Rework Procedure 1
Raise and pin truck body. Refer to Operation and Maintenance Manual, SEBU8406, "Cable (Truck Body Retaining)"
Illustration 2 g06103991
Top view of rear hood rework area
(A) Body Rocker
(B) Rear Hood
(C) Rework LocationUse a suitable tool, remove material from the rear hood (B) in location (C). Insure a minimum gap of 25.0 mm (0.98 inch) between rear hood (B) and body rocker assembly (A) is achieved.Note: No part replacement is necessary.Rework Procedure 2
Raise and pin truck body. Refer to Operation and Maintenance Manual, SEBU8406, "Cable (Truck Body Retaining)"
Illustration 3 g06103862
Top view of potential interference area before modification
(A) Body Rocker
(B) Rear Hood
Illustration 4 g06104435
Top view of pin removal
(A) Body Rocker
(B) Rear Hood
(D) Plate and Hardware
(E) Pin
Remove and retain plate and hardware (D).
Using appropriate lifting device, remove and retain pin (E).Note: Secure body rocker (A) from falling.
Illustration 5 g06103963
Top view of body rocker after modification
(A) Body Rocker
(B) Rear Hood
Using appropriate lifting device, turn body rocker (A) 180 degrees and install with improved orientation per illustration 5.Install retained pin (E). Secure with retained plate and hardware (D)Note: No part replacement is necessary.