PLATE 8H3203 - Caterpillar

Illustration 17 g06014624
(17) 351-9417 Bracket As
(28) 8T-4195 Bolts
(33) 7X-7729 Washers
(34) 351-9303 Cover As
Attach cover assembly (34) to bracket assembly (17) using five bolts (28) with five washers (33). Torque the bolts to 55 10 N m (41 7 ft lb).Note: Install the cover assembly from the direction shown in Illustration 18.
Illustration 18 g06014623
(15) 351-9416 Support As
(28) 8T-4195 Bolts
(33) 7X-7729 Washers
(35) 351-9304 Cover As
Attach cover assembly (35) to bracket assembly (15) using five bolts (28) with five washers (33). Torque the bolts to 55 10 N m (41 7 ft lb).Note: Install the cover assembly from the direction shown in Illustration 18.
Illustration 19 g06014633
(28) 8T-4195 Bolts
(33) 7X-7729 Washers
(34) 351-9303 Cover As
(35) 351-9304 Cover As
(36) 351-9305 Cover As
Attach cover assembly (34) to cover assembly (35) using five bolts (28) with five washers (33). Torque the bolts to 55 10 N m (41 7 lb ft).
Attach cover assembly (36) to support assembly (17), and support assembly (15) using three bolts (28) with three washers (33) on each side of the cover assembly. Torque the bolts to 55 10 N m (41 7 lb ft).
Illustration 20 g06014642
(2) 5P-7468 Clips
(3) 5P-7469 Clips
(4) 5P-8444 Grommets
Reinstall clips (2), clips (3), and grommets (4) underneath the oil pan of the engine.
Illustration 21 g06013040
(1) 8X-2884 Guard
Reinstall guards (1) using the hardware that was removed in Step 1.Note: The following steps are performed in the six locations shown in Illustrations 24 and 25.
Illustration 22 g06014726
(38) 1N-2914 Cylinder Block Cover
Remove cylinder block cover (38) and discard the hardware.
Illustration 23 g06014740
(38) 1N-2914 Cylinder Block Cover
(39) 272-0759 Seal
(40) 6V-5839 Washers
(41) 161-7632 Self-Locking Bolts
Install cylinder block cover (38) using four bolts (41) with four hard washers (40), and seal (39). Torque the bolts to 55 10 N m (41 7 lb ft).
Illustration 24 g06015288
(38) 1N-2914 Cylinder Block Cover
Install 3 cylinder block covers (38) in the location shown in Illustration 24.
Illustration 25 g06015313
(38) 1N-2914 Cylinder Block Cover
Install 3 cylinder block covers (38) in the location shown in Illustration 25.