PLATE & FILM GP 8I5145 - Caterpillar

Engine oil filter change. 1. Remove and discard old oil filter. 2. Attach new oil filter and hand tighten.Change planetary gear lube. S/N 6JD112 & up 1. Move the machine until the plug in the end of the planetary is in the 6:00 position.2. Remove the plug. 3. After the gear lube has drained move the machine until the plug is in either the 3:00 or 9:00 position.4. Add gear lube until gear lube level reaches this point.5. Replace the plug and repeat procedure on other planetary.Change planetary gear lube. S/N 6JD1-111 1. Move the machine until the arrow stamped into the end of the planetary is pointing up. 2. Remove the drain/fill plug located at the bottom of the planetary. 3. After the gear lube has drained move the machine until the arrow stamped into the end of the planetary is pointing down. 4. Remove the check plug and add gear lube until the level is at height of check plug.5. Replace plugs and then repeat procedure on other planetary.