PLATE 8S5722 - Caterpillar

2. Fasten a strap and hoist to each side of the cleaner bar. Remove bolt (1) and clamp (2) that hold the oil lines to the cleaner bar. 3. Remove bolts (4). Use two people and remove drive shaft guard (3). The weight of the guard is 63 kg (140 lb.). 4. Remove bolts (5) from both sides of the cleaner bar. Remove the cleaner bar. The weight of the cleaner bar is approximately 531 kg (1180 lb.).Install Rear Cleaner Bar (815B)
1. Make an alignment of dowels (1) and the machine. Install the cleaner bar. 2. Install drive shaft guard (2).3. Connect the bulldozer group to the cleaner bar. See INSTALL BULLDOZER GROUP.