8T6504 PLATE-CERTIFICATION (ROPS) Caterpillar parts
D10N
Rating:
Alternative (cross code) number:
CA8T6504
8T-6504
8T6504
CA8T6504
8T-6504
8T6504
Weight: 0.06 pounds 0 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 8T6504:
Number on catalog scheme:
2
For full view, you need register
Caterpillar parts catalog:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 138-7573 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g06195779
Install coupling assembly (29) and tighten setscrews (28) to a toque of 110 10 N m (81 7 lb ft).
Illustration 2 g06195775
Illustration 3 g06195776
Attach Tooling (A), Tooling (B), and a suitable lifting device to piston pumps (25). The combined weight of piston pumps (25) is approximately 154 kg (340 lb). Position piston pumps (25) and pump coupling (27) to the machine and install bolts (26). Remove Tooling (A), Tooling (B), and the suitable lifting device.
Illustration 4 g06195767
Illustration 5 g06195768
Illustration 6 g06195769
Attach a suitable lifting device to engine (22). The weight of engine (22) is approximately 794 kg (1750 lb).
Install supports (24).
Raise engine (22) and remove Tooling (A) and lower engine onto supports (24).
Remove the suitable lifting device.
Install bolt (23). Repeat for the opposite side.
Illustration 7 g01625927
Use two people in order to position bracket assembly (21). The weight of bracket assembly (21) is approximately 41 kg (90 lb). Attach cable straps (20).
Illustration 8 g01625896
Connect harness assembly (14) and attach cable strap (15).
Connect hose assemblies (19), (18), (17), and (16).
Install tube assemblies (13) and (12).
Illustration 9 g01625866
Connect hose assembly (11).
Connect harness assembly (10) and attach cable strap (9).
Illustration 10 g01625855
Install tube assembly (3), tube assembly (4), and tube assembly (2).
Connect hose assemblies (6), (8), and (5).
Connect hoses (7).
Illustration 11 g01625843
Position bracket assembly (1) and connect bracket assembly (1).End By:
Install the implement piston pump. Refer to Disassembly and Assembly, "Piston Pump (Implement) - Install".
Install the two middle bottom guards. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
Install the rollover protection structure. Refer to Disassembly and Assembly, "Rollover Protection Structure (ROPS) - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 138-7573 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g06195779
Install coupling assembly (29) and tighten setscrews (28) to a toque of 110 10 N m (81 7 lb ft).
Illustration 2 g06195775
Illustration 3 g06195776
Attach Tooling (A), Tooling (B), and a suitable lifting device to piston pumps (25). The combined weight of piston pumps (25) is approximately 154 kg (340 lb). Position piston pumps (25) and pump coupling (27) to the machine and install bolts (26). Remove Tooling (A), Tooling (B), and the suitable lifting device.
Illustration 4 g06195767
Illustration 5 g06195768
Illustration 6 g06195769
Attach a suitable lifting device to engine (22). The weight of engine (22) is approximately 794 kg (1750 lb).
Install supports (24).
Raise engine (22) and remove Tooling (A) and lower engine onto supports (24).
Remove the suitable lifting device.
Install bolt (23). Repeat for the opposite side.
Illustration 7 g01625927
Use two people in order to position bracket assembly (21). The weight of bracket assembly (21) is approximately 41 kg (90 lb). Attach cable straps (20).
Illustration 8 g01625896
Connect harness assembly (14) and attach cable strap (15).
Connect hose assemblies (19), (18), (17), and (16).
Install tube assemblies (13) and (12).
Illustration 9 g01625866
Connect hose assembly (11).
Connect harness assembly (10) and attach cable strap (9).
Illustration 10 g01625855
Install tube assembly (3), tube assembly (4), and tube assembly (2).
Connect hose assemblies (6), (8), and (5).
Connect hoses (7).
Illustration 11 g01625843
Position bracket assembly (1) and connect bracket assembly (1).End By:
Install the implement piston pump. Refer to Disassembly and Assembly, "Piston Pump (Implement) - Install".
Install the two middle bottom guards. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
Install the rollover protection structure. Refer to Disassembly and Assembly, "Rollover Protection Structure (ROPS) - Remove and Install".
Parts plate Caterpillar catalog:
3408, 3412, 589, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 990, 992C, 992D, D10N, D10R, D8L, D9L, D9N, D9R
773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777F, 777G, 844H, 844K, 854K, 990H, 990K, 992K, 993K, AD55B, AD60, C27, C32, D10N, D10R, D10T, D10T2, TH48-E70
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 245, 245B, 245D, 3304B, 3306, 5130, 5130B, 5230, 5230B, 561B, 561C, 572G, 578, 589, 594H, 613, 621, 621B, 621E, 621F, 621R, 623, 623E, 623F, 627, 627B, 627E, 6...
24H, 589, 776C, 776D, 777B, 777D, 777F, 777G, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 980...
589, 824C, 826C, 834B, 834H, 836H, 980C, 980F, 980F II, 980G, 980G II, 980H, 983B, 988B, 988F II, 988G, 988H, AD30, D10N, D10R, D10T, D400, D44B, D550B, D8L, D9L, D9N, D9R, D9T, R2900, R2900G
589, D10N, D8L, D9L, D9N, D9R, D9T
589, D10N, D10R, D8L, D9L, D9R
578, 589, D10N, D10R, D10T, D10T2, D8L, D8N, D8R, D8R II, D8T, D9L, D9N, D9R, D9T
583T, 589, D10N, D10R, D10T, D10T2, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR...
578, 589, D10N, D6H, D7H, D8L, D9L, D9N
12H, 140H, 14H, 16H, 330C, 330C FM, 330C L, 330C MH, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, 844K, 938G, 950G, 990K, 993K, D10N, D10R, D10T, D250E II, D300E II, D350E...
D10N, D8L, D9L, D9N, D9R, D9T
9X2927
PLATE
D9N
D9N
9X2239
PLATE-ROPS
D10N
D10N