PLATE AS-PUSH 8X2366 - Caterpillar

Illustration 1 g03890112
Front view
Table 1
Specification for 390-4071 Torque Converter Gp
Item Qty Part Specification Description
1 18 0S-1588 Bolt Torque to 50 7 N m (37 5 lb ft).
2 1 6V-9667 Bolt Torque to 530 50 N m (391 37 lb ft).
Illustration 2 g03890126
Section A-A
Table 2
Item Qty Part Specification Description
3 Thickness of three new discs and two new plates is 21.35 0.34 mm (0.841 0.013 inch):
3 336-9318 Friction Disc Thickness of one new disc is 4.83 0.08 mm (0.190 0.003 inch).
2 1T-1897 Plate Thickness of one new plate is 3.43 0.05 mm (0.135 0.002 inch).
4 26 9X-8880 Bolt Use the following procedure to tighten bolts:
1. Tighten two of bolts that are separated by 180° to a torque of 240 25 N m (177 18 lb ft).
2. Tighten bolts by alternating 45° until eight bolts are tightened to a torque of 240 25 N m (177 18 lb ft).
3. Tighten remaining bolts to a torque of 240 25 N m (177 18 lb ft).
4. Ensure that all of bolts have been tightened to a torque of 240 25 N m (177 18 lb ft).
5 12 0T-0768 Bolt Torque to 80 10 N m (59 7 lb ft).
6 30 9X-8877 Bolt Use the following procedure to tighten bolts:
1. Tighten two of bolts that are separated by 180° to a torque of 120 15 N m (89 11 lb ft).
2. Tighten bolts by alternating 45° until eight bolts are tightened to a torque of 120 15 N m (89 11 lb ft).
3. Tighten remaining bolts to a torque of 120 15 N m (89 11 lb ft).
4. Ensure that all of bolts have been tightened to a torque of 120 15 N m (89 11 lb ft).
7 Thickness of five new discs and four new plates is 53.35 0.72 mm (2.100 0.028 inch):
5 324-9127 Friction Disc Thickness of one new disc is 5.59 0.08 mm (0.220 0.003 inch).
4 390-4061 Plate Thickness of one new plate is 6.35 0.08 mm (0.250 0.003 inch).
8 16 9X-8883 Bolt Use the following procedure to tighten bolts:
1. Tighten two of bolts that are separated by 180° to a torque of 240 25 N m (177 18 lb ft).
2. Tighten bolts by alternating 45° until eight bolts are tightened to a torque of 240 25 N m (177 18 lb ft).
3. Tighten remaining bolts to a torque of 240 25 N m (177 18 lb ft).
4. Ensure that all of bolts have been tightened to a torque of 240 25 N m (177 18 lb ft).
9 3 0S-1602 Bolt Torque to 240 25 N m (177 18 lb ft).
10 1 133-4296 Lip Type Seal Lubricate seal lightly with lubricant that is being sealed.
11 12