PLATE ASSEM. 9D5783 - Caterpillar

Assembly Procedure
Illustration 1 g06063826
Install needle bearing (16).
Illustration 2 g06063819
Install spring (15) and pop rivets (14).
Illustration 3 g06063814
Install pedal assembly (13), shaft (11), and spring pin (12).
Illustration 4 g06063808
Install link (10), spacers (9), washers (8), and anchor bolts (7).
Personal injury or death can result from a compressed recoil spring being released suddenly using incorrect disassembly procedures.A recoil spring that is held in compression can result in the recoil spring being released unexpectedly with extreme force which can cause serious injury or death.Make sure that the correct disassembly procedure is used, if a front track roller frame has a crack in the parent metal or weld connection (or a tubular section that has separated from the front of the frame assembly) when the recoil spring is still held in compression.Refer to the Disassembly and Assembly manual which contains the disassembly procedure that must be used to decrease the possibility of injury while performing service on the track roller frame. If inspection of the track roller frame reveals any cracks or damage, consult your Caterpillar dealer before completing an service on the track roller frame.
Illustration 5 g06063805
Install spring (6).
Illustration 6 g06063771
Install sensor (5) and bolts (4).
Illustration 7 g06063739
Install O-ring seal (3).
Illustration 8 g06063726
Install sensor assembly (2) and bolts (1).End By:
Install decelerator and brake control.