PLATE A SIDE 9K5702 - Caterpillar

Assembly Procedure
Illustration 1 g02686636
Install O-ring seals (19) into sight gauge (18).
Illustration 2 g02686598
Position sight gauge (18) and install mounting bolts (17) on the side of the hydraulic tank. Tighten mounting bolts (17) to a torque of 10 1 N m (89 9 lb in).
Illustration 3 g02686412
Illustration 4 g02686400
Install plate (16) and screen assemblies (15) on baffle assembly (8).
Install nut (14). Tighten nut (14) to a torque of 10.0 1.5 N m (88.51 13.28 lb in).
Illustration 5 g02686396
Install O-ring seal (13) onto baffle assembly (8).
Illustration 6 g02686358
Illustration 7 g02686316
Install screen assembly (11) and plate (12) on baffle assembly (7).
Install nut (10). Tighten nut (10) to a torque of 10.0 1.5 N m (88.51 13.28 lb in).
Illustration 8 g02684596
Install O-ring seal (9) onto baffle assembly (7). Repeat this step for the remaining baffle assembly (7).
Illustration 9 g02684548
Install baffle assembly (8) and baffle assemblies (7).
Illustration 10 g02684539
Install gasket (6) (not shown) and cover (5).
Illustration 11 g02684532
Install strainer assembly (4). Install lock ring (3).
Illustration 12 g02684457
Install filler cap (2) and lock filler cap (2). Install breaker relief valve (1). End By:
Install the implement hydraulic tank.