9M6063 PLATE ASSEM. Caterpillar parts
988
Rating:
Alternative (cross code) number:
CA9M6063
9M-6063
9M6063
CA9M6063
9M-6063
9M6063
Weight: 19 pounds 8 kg.
WHEEL LOADER,
Compatible equipment models: 9M6063:
Information:
Personal injury or death can result from a brake malfunction. Do not operate the machine if the brake was applied due to a malfunction of the brake system.Correct any problem before attempting to operate the machine.
Manual Brake Release With Hand Pump for CC34B
To release the parking brake manually on the CC24B, perform the following procedure:
In order to prevent the machine from moving, block the drum and block the tires securely.
Illustration 1 g03162543
In order to hold the front frame and the rear frame rigid, install the steering frame lock into the LOCKED position. Note: Refer to the Operation and Maintenance Manual, "Steering Frame Lock" for further information.
Open the engine compartment.
Ensure that the propel lever is in the neutral position. If the propel lever is not in the neutral position, the hand pump will not build pressure.
Illustration 2 g03179318
Close needle valve (1). The setscrew in the knob of the needle valve must be released in order to open the needle valve.
Pump the hand pump (2) until the pump (2) will no longer pump. Approximately five to seven full strokes of the pump will be required. The brakes are now released.
In order to engage the brakes, open needle valve (1). Manual Brake Release for CB34B, CB34B XW, and CB36B
In order to prevent the machine from moving, block the drum and block the tires securely.
Illustration 3 g03162543
In order to hold the front frame and the rear frame rigid, install the steering frame lock into the LOCKED position. Note: Refer to the Operation and Maintenance Manual, "Steering Frame Lock" for further information.
Open the engine compartment.
Illustration 4 g03201219
Remove the rubber plugs (3) that are located in the center of the propel motors. The rubber plugs (3) may be covered with paint. The propel motors are located on the front left and right rear drum supports.
Consult your Cat dealer for the bars and bolts that are required to release the parking brake manually.
Bolt one of the brake release bars to each of the propel motors. Thread the bolt into the propel motor until the bolt stops.
Tighten the nut on the bolt until there is tension on the nut.
The brakes are now released. Reverse the procedure in order to engage the brakes.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
7M0330
PLATE AS-BRUSH
16, 1693, 245, 3406, 3408, 3412, 3508B, 3512, 594, 621, 627, 631C, 631D, 633C, 633D, 637D, 651, 651E, 657B, 657E, 769C, 772, 824B, 966D, 977K, 988, 988B, 992C, D10, D342, D342C, D348, D379A, D379B, D3...
16, 1693, 245, 3406, 3408, 3412, 3508B, 3512, 594, 621, 627, 631C, 631D, 633C, 633D, 637D, 651, 651E, 657B, 657E, 769C, 772, 824B, 966D, 977K, 988, 988B, 992C, D10, D342, D342C, D348, D379A, D379B, D3...
8F4102
PLATE
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M ...
1S9172
PLATE
16, 1693, 3406, 594, 631C, 657, 657B, 666, 769, 777, 824B, 826B, 834, 983, 988, 992, D342C, D343, D348, D8H, D9G, D9H, G343
16, 1693, 3406, 594, 631C, 657, 657B, 666, 769, 777, 824B, 826B, 834, 983, 988, 992, D342C, D343, D348, D8H, D9G, D9H, G343
9M8918
PLATE ASSEM.
16, 1693, 3406, 594, 631C, 657, 657B, 666, 769, 777, 824B, 826B, 834, 983, 988, 992, D342C, D343, D348, D8H, D9G, D9H, G343
16, 1693, 3406, 594, 631C, 657, 657B, 666, 769, 777, 824B, 826B, 834, 983, 988, 992, D342C, D343, D348, D8H, D9G, D9H, G343
7M9888
PLATE
16, 1693, 3406, 594, 631C, 657, 657B, 666, 769, 777, 824B, 826B, 834, 983, 988, 992, D320A, D342C, D343, D348, D4D, D8H, D9G, D9H, G343
16, 1693, 3406, 594, 631C, 657, 657B, 666, 769, 777, 824B, 826B, 834, 983, 988, 992, D320A, D342C, D343, D348, D4D, D8H, D9G, D9H, G343
5S1213
PLATE
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 245, 245B, 245D, 3304B, 3306, 5130, 5130B, 5230, 5230B, 561B, 561C, 572G, 578, 589, 594H, 613, 621, 621B, 621E, 621F, 621R, 623, 623E, 623F, 627, 627B, 627E, 6...
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 245, 245B, 245D, 3304B, 3306, 5130, 5130B, 5230, 5230B, 561B, 561C, 572G, 578, 589, 594H, 613, 621, 621B, 621E, 621F, 621R, 623, 623E, 623F, 627, 627B, 627E, 6...
4J3816
PLATE
215, 215B, 225, 229, 235, 235B, 235D, 245, 245B, 24H, 24M, 5110B, 5130, 5130B, 5230, 5230B, 528, 589, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633...
215, 215B, 225, 229, 235, 235B, 235D, 245, 245B, 24H, 24M, 5110B, 5130, 5130B, 5230, 5230B, 528, 589, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633...
2G4553
PLATE
621B, 621E, 621F, 621G, 621H, 621K, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631E, 631G, 633E II, 637D, 637E, 637G, 641B, 650B, 651E, 657B, 657E, 657G, 666...
621B, 621E, 621F, 621G, 621H, 621K, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631E, 631G, 633E II, 637D, 637E, 637G, 641B, 650B, 651E, 657B, 657E, 657G, 666...
1S0057
PLATE
14E, 16, 824B, 825B, 834, 834B, 836, 972G, 980G, 980G II, 988, 988B, 988F, 988F II, 988G, 992, D44B, D550B, R1700 II
14E, 16, 824B, 825B, 834, 834B, 836, 972G, 980G, 980G II, 988, 988B, 988F, 988F II, 988G, 992, D44B, D550B, R1700 II
3K6446
PLATE
824, 824B, 826B, 834, 988
824, 824B, 826B, 834, 988
9M6889
PLATE
824, 824B, 834, 988
824, 824B, 834, 988
4K9529
PLATE
988
988
4K9379
PLATE
988
988
3K6488
PLATE
988
988
5K8426
PLATE
988
988
9M3378
PLATE
824, 824B, 988
824, 824B, 988
9M3380
PLATE ASSEM.
824, 824B, 988
824, 824B, 988
5M7963
PLATE
D8H, D9G
D8H, D9G