9V2030 PLATE Caterpillar parts
916, 926, 928F, 928G, G916, IT28G
Rating:
Alternative (cross code) number:
CA9V2030
9V-2030
9V2030
CA9V2030
9V-2030
9V2030
Weight: 9 pounds 4 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Compatible equipment models: 9V2030:
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1 Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01266942
Install the legs of Tooling (A) behind crankshaft front seal (1). Install a suitable spacer (2) between Tooling (A) and crankshaft (3). Use Tooling (A) in order to pull the crankshaft front seal out of the front housing. Note: Do not damage the bore for the crankshaft front seal in the front housing.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B 9U-6210 Front Seal Installer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the bore for the crankshaft front seal in the front housing is clean and free from damage.
Illustration 2 g01266453
Typical example
Assemble Tooling (B).
Align a new crankshaft front seal (1) to the front housing.
Use Tooling (B) to install crankshaft front seal (1). Ensure that the front face of the seal is installed to a depth of 9 0.2 mm (0.354 0.008 inch) into the front housing.
Remove Tooling (B) from the crankshaft. End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1 Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01266942
Install the legs of Tooling (A) behind crankshaft front seal (1). Install a suitable spacer (2) between Tooling (A) and crankshaft (3). Use Tooling (A) in order to pull the crankshaft front seal out of the front housing. Note: Do not damage the bore for the crankshaft front seal in the front housing.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B 9U-6210 Front Seal Installer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the bore for the crankshaft front seal in the front housing is clean and free from damage.
Illustration 2 g01266453
Typical example
Assemble Tooling (B).
Align a new crankshaft front seal (1) to the front housing.
Use Tooling (B) to install crankshaft front seal (1). Ensure that the front face of the seal is installed to a depth of 9 0.2 mm (0.354 0.008 inch) into the front housing.
Remove Tooling (B) from the crankshaft. End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 2290, 2390, 2...
120G, 12F, 12G, 130G, 140, 141, 14E, 14G, 153, 16, 163, 16G, 172, 173B, 183, 183B, 184, 191, 193, 30/30, 416, 416B, 426B, 428, 428B, 438B, 446, 46, 508, 515, 517, 518, 525, 525D, 527, 528, 535D, 545D,...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, ...
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446, 446B, 446...
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928F, 928G, 928H, 928HZ, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C, D4H, D4H XL, D4HTS...
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928G, 928H, 928HZ, 938F, 938G, 938G II, 988F, 988F II, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455...
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...
910, 916, 926, 926A, 931B, 931C, 931C II, 933, 939, D3C III, D4B, D4C, D4C III, D4H, D4HTSK II, D5C, D5C III, IT18B, IT28, IT28B
528, 528B, 530B, 561H, 561M, 613C, 613C II, 613G, 639D, 651E, 657E, 657G, 916, 926, 930R, D7G, IT18B, IT28
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12M, 135H, 135H NA, 926, 928F, 930, 930R, 936, G936, IT28, IT28F
815F, 924F, 928F, 938F
916, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 926, 926A, 928F, 928G, 928HZ, 930G, 936F, 938F, 938G, 938G II, 938H, G916, G936, IT28G
1326760
PLATE AS
928G, 928HZ, IT28G
928G, 928HZ, IT28G
1326759
PLATE AS
928G, 928HZ, IT28G
928G, 928HZ, IT28G
2021320
PLATE-IDENTIFICATION
928G, 928HZ, IT28G
928G, 928HZ, IT28G
1133885
PLATE
928G, 928HZ, IT28G
928G, 928HZ, IT28G
2024452
PLATE & FILM GP
928G, IT28G
928G, IT28G
1272885
PLATE-ROPS/FOPS
928G, IT28G
928G, IT28G
2167297
PLATE
908
908
1657069
PLATE-BRAKE
906H, 906H2, 907H, 907H2, 908, 908H, 908H2
906H, 906H2, 907H, 907H2, 908, 908H, 908H2
1567872
PLATE
908
908
2174338
PLATE
908
908
1743513
PLATE AS
908
908
322B L, 322C, 325B L, 325C, 330B L, 928G, 966G, 966G II, 966H, 972G, 972G II, 992G, 992K