PLATE A LH 9V9088 - Caterpillar

2. Disconnect two lines (1) and (3) from the slack adjuster.3. Disconnect hose (4) from the slack adjuster.4. Remove the two bolts that hold slack adjuster (2) to the differential housing, and remove the slack adjuster. The following steps are for installation of the slack adjuster.5. Put slack adjuster (2) in position, and install the two bolts that hold it. Line (1) is from the right rear brake. Line (3) is from the left rear brake. Hose (4) is from the rear brake master cylinder and rotochambers.6. Connect lines (1) and (3) and hose (4) to slack adjuster (2).7. Bleed the air from the brake system. See Testing And Adjusting for the correct procedure to bleed the brake system.