PLATE 9W0120 - Caterpillar

3. Remove the bolts that hold elbow (1) to the oil pump. Remove elbow (1) and the tube from the oil cooler.4. Remove the bolts that hold flange (2) to the adapter. Move the flange away from the adapter.5. Remove the two bolts and retainers that hold tube (4) in the oil cooler.6. Disconnect tube assemblies (5) and (8) from bonnet (9).7. Fasten a hoist and two straps to oil cooler (10).8. Remove bolts (3) and (6) and lift the oil cooler off of tubes (4) and (7). The weight of the oil cooler is 80 kg (175 lb). The following steps are for installation of the oil cooler. Also, make sure the tubes in the oil cooler are clean and free of dirt and foreign material.9. Fasten a hoist and two straps to oil cooler (10). Put the oil cooler in position on tubes (4) and (7).10. Install bolts (3) and (6) to hold the oil cooler to the engine.11. Connect tube assemblies (5) and (8) to bonnet (9).12. Install the bolts and retainers to hold tube (4) in the oil cooler.13. Put flange (2) in position on the adapter, and install the bolts that hold it.14. Put the tube and elbow (1) in position on the oil cooler and oil pump. Install the bolts that hold the elbow to the oil pump.15. Fill the cooling system with coolant to the correct level. See the Maintenance Manual.16. Fill the engine with oil to the correct level. See the Maintenance Manual.