4699500 PLATFORM-PUMP Caterpillar parts
Rating:
Alternative (cross code) number:
CA4699500
469-9500
4699500
CA4699500
469-9500
4699500
Information:
High Pressure Cylinder (9)Safety message (9) is attached inside the cover for each recoil spring housing.
g01783633
Personal injury or death can result from grease under pressure.Grease coming out of the relief valve under pressure can penetrate the body causing injury or death.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened.Loosen the relief valve one turn only.If track does not loosen, close the relief valve and contact your Caterpillar dealer.
High Pressure Fuel Lines (10)Safety message (10) is located by the fuel tank. Do not purge the nuts.
g01381180
Personal injury can result from removing hoses or fittings in a pressure system.Failure to relieve pressure can cause personal injury.Do not disconnect or remove hoses or fittings until all pressure in the system has been relieved.
Do Not Weld on ROPS (11)Safety message (11) is located on the right post outside the cab.
g01948319
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
Do Not Operate (13) (Engine)Safety message (13) is located inside the engine compartment.
g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Do Not Operate (14) (Winch)Safety message (14) is located on the right side of the machine on the vertical wall of the winch frame, if equipped.
g01055734
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
No Step (15)Safety message (15) is located on the right side of the machine on the vertical wall of the winch frame, if equipped.
g01370910
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
g01783633
Personal injury or death can result from grease under pressure.Grease coming out of the relief valve under pressure can penetrate the body causing injury or death.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened.Loosen the relief valve one turn only.If track does not loosen, close the relief valve and contact your Caterpillar dealer.
High Pressure Fuel Lines (10)Safety message (10) is located by the fuel tank. Do not purge the nuts.
g01381180
Personal injury can result from removing hoses or fittings in a pressure system.Failure to relieve pressure can cause personal injury.Do not disconnect or remove hoses or fittings until all pressure in the system has been relieved.
Do Not Weld on ROPS (11)Safety message (11) is located on the right post outside the cab.
g01948319
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
Do Not Operate (13) (Engine)Safety message (13) is located inside the engine compartment.
g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Do Not Operate (14) (Winch)Safety message (14) is located on the right side of the machine on the vertical wall of the winch frame, if equipped.
g01055734
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
No Step (15)Safety message (15) is located on the right side of the machine on the vertical wall of the winch frame, if equipped.
g01370910
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Parts platform Caterpillar catalog:
4696636
PLATFORM GP-RH
Caterpillar
Caterpillar
4696530
PLATFORM AS
Caterpillar
Caterpillar
4696446
PLATFORM GP
Caterpillar
Caterpillar
4694171
PLATFORM AS
Caterpillar
Caterpillar
4694170
PLATFORM GP-
Caterpillar
Caterpillar
4685567
PLATFORM GP
Caterpillar
Caterpillar
4714106
PLATFORM AS-
Caterpillar
Caterpillar
4714100
PLATFORM AS-
Caterpillar
Caterpillar
4712130
PLATFORM GP-
Caterpillar
Caterpillar
4700540
PLATFORM GP
Caterpillar
Caterpillar
4700503
PLATFORM GP-
Caterpillar
Caterpillar
4700502
PLATFORM GP-
Caterpillar
Caterpillar