PLIERS 1364149 - Caterpillar

Illustration 1 g03410442
Table 1
Specification for 290-9275 Hoe Stick Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and cylinder pin bores.
1 - - Assemble the stick cylinder so that the grease zerk is directed, as shown.
2 2 166-1498 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
3 1 5I-3299 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
4 1 113-2963 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
5 2 228-5621 Bushing(1) Bore before assembly is 120.32 0.04 mm (4.737 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
6 2 235-7679 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 166-1496 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
8 2 241-7231 Bushing(1) Bore before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
9 2 228-5617 Bushing(1) Bore before assembly is 100.29 0.04 mm (3.948 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
(1) Install the bushings in the bore so that the part number of each bushing is facing outward