PLUG 0858893 - Caterpillar

0858893 PLUG Caterpillar parts 301.5, 302.5, 303, 303.5, 303.5C, 303C CR, 307, 307B, 572R, 572R II, E240C, E300B, EL240B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA0858893
085-8893
0858893

Weight: 0.09 pounds 0 kg.

Information:

DASH SIZE 000000000002

HEX SIZE 5 mm

OVERALL LENGTH 7 mm

THREAD SIZE .12-28BSPT

WITH THREAD SEALANT Y

Buy PLUG 0858893 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, PIPELAYER,

Compatible equipment models: 0858893:

EXCAVATOR 307 E240C E300B EL240B

MINI HYD EXCAVATOR 301.5 302.5 303 303.5 303.5C 303C CR 307 307B

PIPELAYER 572R 572R II Caterpillar

Number on catalog scheme: 1

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-7405 Eyebolt 1
Illustration 1 g02367078
Attach Tooling (A) and a suitable lifting device to brake accumulator (3). The weight of brake accumulator (3) is approximately 29 kg (64 lb).
Use Tooling (A) and the suitable lifting device in order to position brake accumulator (3) to the machine.
Illustration 2 g02367297
Install the washers and bolts (7).
Illustration 3 g02367277
Install fitting (5).
Connect tube assembly (6) and hose assembly (4).
Illustration 4 g02367257
Install protector (2) onto brake accumulator (3).
Repeat Steps 12 through 6 for the remaining brake accumulator .
Illustration 5 g02367056
Install bracket (8).
Illustration 6 g02365158
Install cover plate (1).
Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Dry nitrogen is the only gas approved for use in the accumulators. The charging of oxygen gas in an accumulator will cause an explosion. An explosion can be eliminated by using nitrogen gas cylinders with standard CGA (Compressed Gas Association, Inc.) No. 580 connectors. When nitrogen gas is ordered, make sure to order the cylinders with CGA No. 580 connectors.Do not rely on color codes or other methods of identification to tell the difference between nitrogen and oxygen cylinders. In any application, never use an adapter to connect your nitrogen charging group to a valve outlet used on both nitrogen, oxygen, or other gas cylinders. BE SURE YOU USE DRY NITROGEN (99.8% purity).
Check the charge of the brake accumulator. For the correct procedure, refer to the Operation and Maintenance Manual for your machine.
Start the engine and check for leaks. Check for proper operation of the braking system. End By:
Disconnect the steering frame lock.