PLUG 0935318 - Caterpillar

Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the coolant to a level below the water pump.
If necessary, remove the counter weight.
Illustration 1 g06230201
Illustration 2 g06230212
Illustration 3 g06229833
Inspect the gasket for serviceability.
Illustration 4 g06229844
Inspect the gasket for serviceability.
Installation Procedure
Install the water pump in the reverse order of removal.
Illustration 5 g06341007