PLUG 1105525 - Caterpillar

There may be several specific safety messages on your engine. The exact location and a description of the safety messages are reviewed in this section. Become familiar with all safety messages.Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off the engine.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Cat dealer can provide new safety messages.
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Illustration 1 g010195943612 and 3616 Engine Lifting (1)These safety messages for engine lifting are located on the inspection covers for the pushrods. For 3612 Engines, the messages are applied to the covers of cylinders 1, 2, 9, and 10. For 3616 Engines, the messages are applied to the covers of cylinders 1, 2, 13, and 14.
Illustration 2 g00123175
Improper lift rigging can allow unit to tumble causing injury and damage.
If improper equipment is used to lift the engine, injury and damage can occur. Use cables that are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.3606 Engine Lifting (Single Point) (1)The safety message for engine lifting (single point)