PLUG-PIPE 1190746 - Caterpillar

Illustration 11 g03677394
Joystick steering configuration (If Equipped)
The sensors for the steering in a pedal steering configuration are located in the pedal control group.The sensors for the steering and transmission control lever are located in the base of the control lever. The entire base must be replaced in the event of a sensor failure.Transmission Sensors
Illustration 12 g03677398
Pedal steering configuration (If Equipped)
Illustration 13 g03677454
Joystick steering configuration (If Equipped)
The transmission sensors are located in the control lever to the right of the operator seat.Speed Range Switch
Illustration 14 g03677500Speed range switch is located on the transmission joystick to the left of the operator seat.Speed Range Switch
Illustration 15 g03677530The speed range switch is the intermittent three position switch that is located on the console for the transmission lever.Horn Switch
Illustration 16 g03677550
Illustration 17 g03681150The horn switch is the yellow button that is located on the console for the transmission lever.Pump Solenoids
Illustration 18 g06261619
(1) Left track hydrostatic pump
(2) Right reverse solenoid
(3) Left forward solenoid
(4) Right reverse solenoid
(5) Left forward solenoid
(6) Right track hydrostatic pumpThe forward and the reverse solenoids for the left side are located on the left pump. The forward and the reverse solenoids for the right side are located on the right pump. The solenoids allow oil to flow to the left side motor and the right side motor.Motor Solenoids
Illustration 19 g06261763The motor solenoids are located on the back of the motors.Track Speed Sensors
Illustration 20 g06261969The track speed sensors are located on the back of the motors.Electronic Control Module
Illustration 21 g06262031The electronic control module is located on the machine right side, in the side access panel from inside the cab. The electronic control module controls all electronic signals from the implement system, including solenoids, sensors, and switches.Backup Alarm
Illustration 22 g06262034The backup alarm is mounted on the rear of the machine.Backup alarm - The alarm will sound when the lever for the steering and transmission control is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up.