PLUG-CONNECTOR 1573584 - Caterpillar

Removal Procedure
Start By:
Remove the cab rear cover. Refer to Disassembly and Assembly, "Cover (Cab Rear) - Remove and Install".
Release the air system pressure. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Illustration 1 g01592457
Disconnect hose assemblies (1). Disconnect hose assemblies (2).
Illustration 2 g01592460
Disconnect hose assembly (3).
Illustration 3 g01592462
Remove bolts (5). Remove air tank (4). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g01592462
Install air tank (4). Install bolts (5).
Illustration 5 g01592460
Connect hose assembly (3).
Illustration 6 g01592457
Connect hose assemblies (1). Connect hose assemblies (2).
Charge the air pressure in the air reservoir. Refer to Operation and Maintenance Manual, "Starting with an External Air Supply" in order to refill the air tanks. End By:
Install the cab rear cover. Refer to Disassembly and Assembly, "Cover (Cab Rear) - Remove and Install".
Remove the front wheel chocks and the rear wheel chocks. Refer to Disassembly and Assembly, "Wheel Chocks (Front and Rear) - Remove and Install".