PLUG 1G7622 - Caterpillar

Illustration 1 g00763823
Do not operate or work on this work tool unless you have read and understand the instructions and warnings in the Operation And Maintenance Manual for both the work tool and the host machine.Failure to follow the instructions or heed the warnings could result in injury or death.Contact your Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Selection of a hydraulic shear must be done with extra care.Use of a hydraulic shear not recommended by Caterpillar could result in structural damage to the machine.Consult your Caterpillar dealer for hydraulic shear information.
Be sure that no one is near the work tool in order to prevent injury. Keep the work tool under control at all times in order to prevent injury. When a demolition tool is used, all personnel should maintain a minimum distance of 10 m (33 ft).Close all windows. Make sure that all required guards are in place. Wear all required protective equipment. Follow the instructions in the Operation and Maintenance Manual for the work tool.
Serious injury or death could occur from the demolition of pipes, vessels, tanks or other containers that may contain gas, flammable materials or hazardous chemicals.Do not perform any demolition work on these items until all of their contents have been removed.Follow all regulations for the removal and disposal of these materials.
Using the demolition tool to level the work site or push over standing structures may damage the machine or the demolition tool. Use appropriate equipment to do site preparation or maintenance operations.
To avoid structural damage to the machine, do not break road surfaces by placing the cutting edge of the hydraulic shear on the ground and moving the machine.