PLUG-O-RING 1N5998 - Caterpillar

Generator SetC32 MARINE GS (S/N: DSJ1-UP; RTK1-UP)Marine EngineC32 MARINE (S/N: RSD1-UP; RPM1-UP; SDN1-UP)Description Of Change: New software is used for the engines listed above. The new software contains the following improvements:
Corrections to the fuel maps
Corrections to the displayed fuel maps
Corrections to the oil pressure differential alarm set point (Optional Attachment for Duplex Oil Filters Only)
Corrections to the jacket water pressure sensor map (Optional Alarm & Protection Attachment Only), see below for the extra hardware requiredA new coolant pressure sensor is used for engines built with the optional Alarm and Protection (A&P) attachment.Adaptable To: The new software is a direct replacement for the older software. Table 1 contains the new and previous software part numbers.
Table 1
Previous Software Part Number New Software Part Number
443-5266 500-0178
495-0451 500-0179
443-5267 500-0180
443-5268 500-0181
472-7123 500-0182
472-7170 500-0183
472-7171 500-0184
454-9657 500-0186
454-9658 500-0187
454-9659 500-0188
472-7172 500-0189 Table 2 contains the effective serial numbers for the software change.
Table 2
Effective Serial Numbers For Software
S/N:RPM00551-UP
S/N:SDN01256-UP
S/N:RSD00571-UP
S/N:RTK00283-UP
S/N:DSJ00159-UP
Illustration 1 g06025360
(1) 416-6999 Pressure Sensor Gp (Coolant Pressure)
(2) 489-5173 ValveThe existing 183-4760 Pressure Sensor Gp (Coolant Pressure) will not display the high-pressure range. The new 416-6999 Pressure Sensor Gp (Coolant Pressure) requires the installation of the 216-8579 O-Ring Seal and 489-5173 Valve. The existing harness connection must be replaced with the 281-8804 Connector Plug As and two 283-0056 Connector Adapters to connect to the new coolant pressure sensor group. Refer to the engine schematic in SIS Web for the correct pin location within the 281-8804 Connector Plug As.Note: The use of this sensor also requires the engine be flashed with one of the files listed above or newer.The new sensor is adaptable to first production of the serial numbers above. The new sensor is effective from the factory on the engine serial numbers listed in Table 3. Engines built between the effective serial numbers listed in Table 2 and Table 3 have the new sensor installed and all the software improvements listed above excluding the corrections to the oil pressure differential alarm set point (Optional Attachment for Duplex Oil Filters Only).
Table 3
Effective Serial Numbers For Sensor
S/N:RPM00516-UP
S/N:SDN01141-UP
S/N:RSD00548-UP
S/N:RTK00272-UP
S/N:DSJ00156-UP