AVSPARE.COM
parts catalog

PLUG AS-CONNECTOR 2345283 - Caterpillar


2345283 PLUG AS-CONNECTOR Caterpillar parts AD30, AD55, R1600, R1600G, R1700G, R2900G
Rating:
12
Alternative (cross code) number:
CA2345283
234-5283
2345283
Caterpillar 2345283 PLUG AS-CONNECTOR
Weight: 0.20 pounds 0 kg.

Buy PLUG AS-CONNECTOR 2345283 Caterpillar genuine, new aftermarket tractor parts with delivery
LOAD HAUL DUMP, UNDERGROUND ART TRUCK,

Compatible equipment models: 2345283:

LOAD HAUL DUMP  R1600   R1600G   R1700G   R2900G  
UNDERGROUND ART TRUCK  AD30   AD55   Caterpillar
Number on catalog scheme: 74
  For full view, you need register

Information:


Illustration 1 g01228667
VPAT blade angle right solenoid connections
Illustration 2 g01228557
VPAT angle pilot manifold located on the right hand fender in front of the hydraulic oil tank (1) Angle right solenoid valve (2) Angle left solenoid valveThis diagnostic code is associated with the VPAT blade angle right solenoid. The FMI 06 means that the ECM has determined that the current for the solenoid circuit is above normal.The possible causes of this diagnostic code are listed:
The energize circuit of the solenoid is shorted to ground.
The solenoid has failed.
The ECM has failed. This is unlikely.Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear these diagnostic codes when the original diagnostic code has been corrected. Ensure that the diagnostic code of CID 1934 FMI 06 is active before performing this procedure.System Response:When this code is active, the angle function that the solenoid controls will not operate.Test Step 1. CHECK THE SOLENOID
Turn the disconnect switch and the key start switch to the ON position. DO NOT start the engine.
Observe the status of the diagnostic code.
Disconnect the solenoid with the active diagnostic code from the machine harness.Expected Result:The CID 1934 FMI 06 code changes to CID 1934 FMI 05 code when the solenoid is disconnected. Results:
YES - The 1934 FMI 06 code changes to CID 1934 FMI 05 code when the solenoid is disconnected. The circuit is correct. Repair: The solenoid has failed. Repeat this test "CHECK THE SOLENOID" in order to verify the solenoid failure. Replace the solenoid.STOP
NO - The CID 1934 FMI 06 code remains active. Disconnecting the solenoid did not affect the status of the active diagnostic code. Proceed to Test Step 2.Test Step 2. CHECK THE ENERGIZE CIRCUIT OF THE SOLENOID FOR A SHORT TO GROUND
Turn the key start switch and the disconnect switch to the OFF position.
The solenoid remains disconnected from the machine harness.
Disconnect the machine harness connectors from the ECM.
At the machine harness connector, measure the resistance from the signal contact J1-59 (wire F789-YL) to frame ground. Measure the resistance from the signal contact J1-59 (wire F789-YL) to all of the J1 and J2 contacts that are used in the machine harness connectors for the ECM.Expected Result:Each resistance measurement is greater than 5000 ohms.Results:
OK - Each resistance measurement is greater than 5000 ohms. The machine harness is correct. Proceed to Test Step 3.
NOT OK - Each resistance measurement is not greater than 5000 ohms. There is a short in the machine harness. The short is between wire F789-YL and the circuit with the low resistance measurement.Repair: Refer to the complete machine Electrical System Schematic. Examine all of the connectors in the circuits for points in the machine harness where the circuits could be shorted. For information on testing for short circuits and finding short circuits, refer to Testing and Adjusting, "Wiring Harness (Short Circuit) - Test". Repair the machine harness or replace the machine harness.STOPTest Step 3. CHECK THE STATUS OF THE DIAGNOSTIC CODE
Inspect the harness connectors and clean the contacts of

Caterpillar parts catalog:

Caterpillar parts catalog
R1600G Load Haul Dump 9YZ00001-UP (MACHINE) POWERED BY 3176C Engine
AD30 UNDERGROUND ARTICULATED TRUCK CXR00001-UP (MACHINE)
AD55 UNDERGROUND ARTICULATED TRUCK ANW00001-UP (MACHINE)


Parts plug Caterpillar catalog:

7H3171 PLUG-PIPE
1090, 1140, 1160, 1190, 1190T, 120B, 120G, 120M, 120M 2, 1290T, 12E, 12G, 12H, 12H ES, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140B, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M ...
3D4603 PLUG-PIPE
118, 119, 127, 128, 12E, 16, 1674, 1676, 1693, 235, 304, 304.5, 305, 305.5, 305.5E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E2 CR, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 31...
5P7684 PLUG
225, 24H, 30/30, 330C, 330D L, 330D MH, 3406, 3406B, 3406C, 3406E, 3408E, 3412E, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG,...
9S8927 PLUG
10 FT, 215, 225, 245, 245B, 3126B, 8 FT, 950, C7, R1300G, R1600, R1600G
9S4205 PLUG
3508C, 3512B, 3512C, 3516B, 3516C, 517, 518C, 527, 528, 528B, 530B, 561C, 561M, 578, 583R, 589, 621, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E,...
3P7009 PLUG-CUP
120G, 12G, 130G, 140G, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 30/30, 375, 5080, 611, 615, 615C, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 936, 936F, 950B, 950B/950E, 950F, 966C, 966D...
2385507 PLUG AS
30/30, 611, 613C, 613C II, 613G, 615C, 814F, 815F, 824G, 825G, 826G, 950F II, 960F, 966F II, 970F, 980G, 980G II, AD30, D250E, D250E II, D300E, D300E II, DEUCE, R1300, R1300G, R1600, R1600G, R1600H, R...
9G7132 PLUG-ORIFICE
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 621E, 621F, 621G, 623E, 623F, 62...
8M3837 PLUG
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 215, 2...
0961628 PLUG
2384C, 2484C, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, ...
2385508 PLUG AS-ORIFICE
24H, 517, 527, 561M, 578, 583R, 587R, 589, 844, 844H, 844K, 854G, 854K, 988F, 988F II, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 993K, 994, 994D, 994F, 994H, D10R, D11R, D11T, D4H XL, D4HTSK II...
9G7516 PLUG
578, 589, 797, 797B, 797F, 994, 994D, 994F, 994H, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8L, D8N, D8R, D8R II, D8T, D9L, D9N, D9R, D9T, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700...
2228762 PLUG AS-CONNECTOR
AD55, R1600, R1600G, R1700G, R2900G
2381357 PLUG
R1600G, R1700G
2225531 PLUG AS
R1600, R1600G, R1700 II
3788431 PLUG
770G, 770G OEM, 772G, 772G OEM
3186528 PLUG
770G, 772G, CP-44, CP-56, CP-64, CP-76, CS-44, CS-54, CS-56, CS-64, CS-74
3670794 PLUG
324D FM, 324D FM LL, 325D FM, 330D FM, 568 FM LL, 725C, 730C, 735B, 740B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.