PLUG 3527947 - Caterpillar

Illustration 5 g06348606
Plate (5)
Removal Procedure for 793F Truck and 793D Truck
Illustration 6 g06321315
Brackets to be removed from body (For 793F Truck)
Illustration 7 g06321336
Bracket to be removed from body (For 793D Truck)
Illustration 8 g06321316Note: Use fill and blend sand for imperfections in the truck body after cutting the brackets.
Illustration 9 g06321317Note: Use fill and blend sand for imperfections in the truck body after cutting the bracket.
Ensure special care while removing as the plate should be reused later (for 793F Truck only).
Note: Do not remove the plate for 793D Truck.Installation procedure for 793F Truck
Illustration 10 g06349757
(W1) 12 mm (0.5 inch) fillet weld all around
Illustration 11 g06321324
Illustration 12 g06321339
(W2) 12 mm (0.5 inch) fillet weld at both endsRefer to Illustration 12 and Illustration 11 for installing plate (1).
Illustration 13 g06321325
(W3) 12 mm (0.5 inch) fillet weld two placesInstallation procedure for 793D Truck
Illustration 14 g06321332
(W4) 6 mm (0.2 inch) fillet at two places
Illustration 15 g06321333
(W4) 6 mm (0.2 inch) fillet at two placesRefer to Illustration 14 and Illustration 15 for welding two plates (5) on plate (4).
Illustration 16 g06321329
Illustration 17 g06349781
(W5) 12 mm (0.5 inch) fillet weld two places
Illustration 18 g06349461Refer to Illustration 16, Illustration 17, and illustration 18 for installing plate (4) in the body assembly.