3C8394 PLUG Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8394
3C-8394
3C8394
CA3C8394
3C-8394
3C8394
Weight: 60 pounds 27 kg.
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01187006
Attach Tooling (A) and a suitable lifting device to transmission hydraulic control valve (15). The weight of transmission hydraulic control valve (15) is approximately 70 kg (155 lb). Position transmission hydraulic control valve (15). Install bolts (14).
Illustration 2 g01187090
Install tubes (13). Position plate assembly (12) and Install bolts (11).
Illustration 3 g01186757
Illustration 4 g01186762
Install flanges (7) and Connect harness assembly (8). Connect hose assembly (6).
Install tubes (9). Install valve assembly (4) and bolts (5). Note: The slot on coupling assembly (10) must be oriented correctly.
Illustration 5 g01186744
Install plate assembly (3). Install plate (1). Connect harness assembly (2).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01187006
Attach Tooling (A) and a suitable lifting device to transmission hydraulic control valve (15). The weight of transmission hydraulic control valve (15) is approximately 70 kg (155 lb). Position transmission hydraulic control valve (15). Install bolts (14).
Illustration 2 g01187090
Install tubes (13). Position plate assembly (12) and Install bolts (11).
Illustration 3 g01186757
Illustration 4 g01186762
Install flanges (7) and Connect harness assembly (8). Connect hose assembly (6).
Install tubes (9). Install valve assembly (4) and bolts (5). Note: The slot on coupling assembly (10) must be oriented correctly.
Illustration 5 g01186744
Install plate assembly (3). Install plate (1). Connect harness assembly (2).