3P9498 PLUG-ORIFICE Caterpillar parts
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H, 5...
Rating:
Alternative (cross code) number:
CA3P9498
3P-9498
3P9498
CA3P9498
3P-9498
3P9498
Weight: 0.01 pounds 0 kg.
Information:
DASH SIZE
0
ORIFICE SIZE
.889
THREAD SIZE
.06-27NPTF
WITH THREAD SEALANT
N
MOTOR GRADER, WHEEL TRACTOR-SCRAPER,
Compatible equipment models: 3P9498:
Number on catalog scheme:
7
For full view, you need register
Information:
Fuel ratio controls are awkward to hold during disassembly and assembly. The new FT1820 (Change No. 1) Assembly Fixture is an inexpensive device that can be used to hold the fuel ratio controls. The new FT1820 (Change No. 1) Assembly Fixture is a redesigned (simplified) combination of the former FT1820 (Change No. 0) and FT1821 Fixtures. Dealers in the U.S.A. and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. All other dealers can order drawings from their Subsidiary Service Departments.
Caterpillar Tractor Co.
Service G.O. Print Room
Pioneer Park
600 W. Washington Street
East Peoria, IL 61630
Phone: 309-675-0515
Illustration 1. FT1820 Assembly Fixture.Also the 6V9052 and 6V9072 Piston Seal Guides are available to help install the piston assemblies into the fuel ratio control bodies.
Illustration 2. Piston seal guides. Procedure To Use The FT1820 Assembly Fixture
1. Put the FT1820 Assembly Fixture in position in a vise so that the side of the tool (station) to be used is not over the vise jaws.
Illustration 3. FT1820 Assembly Fixture in vise.2. Put the fuel ratio control, that is to be serviced, over the studs on the assembly fixture as shown. Proceed with the disassembly or assembly.
Illustration 4. Fuel ratio control on the FT1820 Assembly Fixture. Procedure To Use 6V9052 And 6V9072 Piston Seal Guides
1. The 6V9052 or 6V9072 Piston Seal Guides can be used to help install the piston assembly into the fuel ratio control body. Put the control body in position on the appropriate work station of the FT1820 Assembly Fixture.2. Use engine oil to lubricate the inside of 6V9052 or 6V9072 Piston Seal Guide. Put the guide in position in the control body as shown.
Illustration 5. Position piston seal guide in the control body.3. Use engine oil to lubricate the piston assembly. Put the piston in the piston seal guide and start the bottom of the piston assembly into bottom bore in the control body.
Illustration 6. Installation of the piston assembly.4. After the piston assembly has been started, push it completely into position in the control body with one smooth continuous motion.
Caterpillar Tractor Co.
Service G.O. Print Room
Pioneer Park
600 W. Washington Street
East Peoria, IL 61630
Phone: 309-675-0515
Illustration 1. FT1820 Assembly Fixture.Also the 6V9052 and 6V9072 Piston Seal Guides are available to help install the piston assemblies into the fuel ratio control bodies.
Illustration 2. Piston seal guides. Procedure To Use The FT1820 Assembly Fixture
1. Put the FT1820 Assembly Fixture in position in a vise so that the side of the tool (station) to be used is not over the vise jaws.
Illustration 3. FT1820 Assembly Fixture in vise.2. Put the fuel ratio control, that is to be serviced, over the studs on the assembly fixture as shown. Proceed with the disassembly or assembly.
Illustration 4. Fuel ratio control on the FT1820 Assembly Fixture. Procedure To Use 6V9052 And 6V9072 Piston Seal Guides
1. The 6V9052 or 6V9072 Piston Seal Guides can be used to help install the piston assembly into the fuel ratio control body. Put the control body in position on the appropriate work station of the FT1820 Assembly Fixture.2. Use engine oil to lubricate the inside of 6V9052 or 6V9072 Piston Seal Guide. Put the guide in position in the control body as shown.
Illustration 5. Position piston seal guide in the control body.3. Use engine oil to lubricate the piston assembly. Put the piston in the piston seal guide and start the bottom of the piston assembly into bottom bore in the control body.
Illustration 6. Installation of the piston assembly.4. After the piston assembly has been started, push it completely into position in the control body with one smooth continuous motion.
Cat SIS web machinery list:
Parts plug Caterpillar catalog:
561H, 578, 583R, 587R, 589, 916, 926, 936, 936F, D10N, D10R, D11N, D11R, D6K2, D6K2 LGP, D8L, D8R, D9L, D9N, D9R, G936
16, 518, 528, 561B, 583H, 621, 621B, 621E, 621F, 623, 623E, 627, 627B, 627E, 627F, 631C, 631E, 637, 637D, 637E, 641, 641B, 650B, 651, 657, 657B, 666, 768B, 769, 772, 773, 814, 815, 834, 941, 950, 951B...
153, 163, 172, 173B, 183B, 191, 613, 613B, 615, 630B, 631D, 631E, 631G, 633, 633C, 633D, 637E, 637G, 650B, 651, 651E, 657E, 657G, 768B, 769, 769C, 769D, 771C, 771D, 772, 772B, 773, 773B, 773D, 775B, 7...
583R, 963C, 973, D8R, D8R II, D8T, D9R
D10R, D10T, D10T2, D9R, D9T
24H, 5110B, 5130, 5130B, 5230, 5230B, 631E, 631G, 633E II, 637D, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 784B, 784C,...
525B, 525D, 535B, 535D, 545, 545D, 555D, 611, 613C II, 615C, 725, 730, 735, 740, 770, 772, 772G, 772G OEM, 797, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 844, 844H, 844K, 854G, 854K, 950G, 95...
621F, 627F
650B, 69D, 768B, 769, 769C, 769D, 771C, 771D
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374F L, 568 FM LL, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777B, 777C, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 135H, 135H NA, 140H, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 16M, 320 L, 320N, 322, ...
793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 797
621E, 623E, 627E, 631E, 637D, 637E, 651E, 657E
621E, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 627E, 627F, 627G, 627H, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 657G, 769C, 772B, 777
8J3233
PLUG
631E, 631G, 633C, 633D, 633E, 637D, 637E, 637G, 651E, 657E, 657G
631E, 631G, 633C, 633D, 633E, 637D, 637E, 637G, 651E, 657E, 657G
5D9088
PLUG-EXPANSION
641B, 651E, 657, 657E, 772
641B, 651E, 657, 657E, 772
8W5655
PLUG
631E, 631G, 633E, 633E II, 637E, 637G, 651E, 657E, 657G
631E, 631G, 633E, 633E II, 637E, 637G, 651E, 657E, 657G
6V8542
PLUG
631D, 631E, 637D, 637E, 639D, 641B, 651E, 657E
631D, 631E, 637D, 637E, 639D, 641B, 651E, 657E
621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 637E, 637G,...
8P6550
PLUG AS
657B, 657E
657B, 657E
6V0417
PLUG
621E, 623E, 627E, 631E, 637E, 651E, 657E
621E, 623E, 627E, 631E, 637E, 651E, 657E
8K6264
PLUG
518, 621E, 621H, 621K, 623H, 623K, 623K LRC, 627E, 627H, 627K, 627K LRC, 637E, 651E, 657E, 950
518, 621E, 621H, 621K, 623H, 623K, 623K LRC, 627E, 627H, 627K, 627K LRC, 637E, 651E, 657E, 950
3G5912
PLUG-THREADED O-RING
657E, 769C, 769D, 771C, 771D, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777D, 784B, 784C, 785B, 785C, 785D
657E, 769C, 769D, 771C, 771D, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777D, 784B, 784C, 785B, 785C, 785D
2890401
PLUG AS
611, 615C, 621F, 621G, 621H, 623G, 623H, 627F, 627G, 627H, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 657G, 769C, 769D, 771C, 771D, 773B, 773D, 775B, 775D, 776C, 776D, 777D
611, 615C, 621F, 621G, 621H, 623G, 623H, 627F, 627G, 627H, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 657G, 769C, 769D, 771C, 771D, 773B, 773D, 775B, 775D, 776C, 776D, 777D