PLUG AS-CONN 4415779 - Caterpillar

Illustration 1 g01384144
Right side view (1) Torque for bolts ... 30 7 N m (22 5 lb ft)
Illustration 2 g01386502
(2) Oil filter base Apply 154-9731 Thread Lock Compound on the tapered end of the hollow stud to length (B) . ... 10.0 1.5 mm (0.39 0.06 inch) Torque for hollow stud (3) ... 68 7 N m (50 5 lb ft)
Tighten the bolts to the standard torque in the numerical sequence that is shown in Illustration 1.
Again tighten the bolts to the standard torque in the numerical sequence.
Illustration 3 g01384157
Front view
Illustration 4 g01386679
(4) Oil filter base Apply 154-9731 Thread Lock Compound on the tapered end of the hollow stud to length (D) . ... 10.0 mm (0.40 inch) Torque for hollow stud (7) ... 80 15 N m (60 11 lb ft) (5) Put clean engine oil on the seal. Tighten the filter until the seal contacts the base. After the seal contacts the base, rotate the filter by 270 degrees. (6) Tighten the cover to the following torque. ... 70 10 N m (50 7 lb ft)
Illustration 5 g01384164
Top view (8) 242-3864 Spring Length under test force ... 43.18 mm (1.700 inch) Test force ... 43.7 N (9.8 lb) Free length after test ... 58.50 0.50 mm (2.303 0.020 inch) Outside diameter ... 11 mm (0.4 inch)