PLUG AS 4943877 - Caterpillar

Table 1
Trip Points for the Monitoring System
Condition Action Default Value Time Delay in Seconds Set Points
Range Default Range Default
E096 (1) High Fuel Pressure Warning On None 8 Maps are not programmable. (1)
E194 (2)High Exhaust Temperature Derate On None 4 Maps are not programmable. (1)
E198 (1) Low Fuel Pressure Warning On None Maps are not programmable. (1)
E198 (2) Low Fuel Pressure Derate
E360 (1) Low Engine Oil Pressure Warning On None 8 Maps are not programmable. (1)
E360 (2) Low Engine Oil Pressure Derate
E360 (3) Low Engine Oil Pressure Shutdown Off 4
E361 (1) High Engine Coolant Temperature Warning On None 10 C7 85 °C (185 °F)
to
108 °C (226 °F) 108 °C (226 °F)
C9 85 °C (185 °F)
to
113 °C (235°F) 113 °C (235 °F)
E361 (2) High Engine Coolant Temperature Derate 1 to 54 C7 86 °C (187 °F)
to
111 °C (232 °F) 111 °C (232 °F)
C9 86 °C (187 °F)
to
116 °C (232 °F) 116 °C (240 °F)
E361 (3) High Engine Coolant Temperature Shutdown Off C7 87 °C (189 °F)
to
111 °C (232 °F) 111 °C (232 °F)
C9 87 °C (189 °F)
to
116 °C (240 °F) 116 °C (240 °F)
E362 (1) Engine Overspeed Warning On None 1 1800-2600 2600
E362 (3) Engine Overspeed Shutdown 1800-2800 2800
E443 (1) High Auxiliary Pressure (2) Warning On 1 to 54 4 0 kPa (0 psi)
to
3150 kPa (457 psi) 1500 kPa (218 psi)
E443 (2) High Auxiliary Pressure (2) Derate Off 3
E443 (3) High Auxiliary Pressure (2) Shutdown
E445 (1) High Auxiliary Temperature (2) Warning On 1 to 54 4 0 °C (32°F)
to
140 °C (284 °F) 105 °C (221 °F)
E445 (2) High Auxiliary Temperature (2) Derate Off 106 °C (223 °F)
E445 (3) High Auxiliary Temperature (2) Shutdown 107 °C (224 °F)
E539 (1) High Intake Manifold Air Temperature Warning On None 8 None 90 °C (194 °F)
E539 (2) High Intake Manifold Air Temperature Derate 1 to 54 110 °C (230 °F)
E2143 (1) Low Engine Coolant Level Warning On 1 to 54 10 None
E2143 (2) Low Engine Coolant Level Derate 1 to 54 10
E2143 (3) Low Engine Coolant Level Shutdown Off 1 to 54 10
(1) The maps may be different. The maps depend on the model of the engine.
(2) The engine must be equipped with the appropriate sensor.