PLUG AS-CONNECTOR 5071383 - Caterpillar

Removal Procedure
When servicing or repairing electric power generation equipment:Make sure the unit is off-line (disconnected from utility and/or other generators power service), and either locked out or tagged DO NOT OPERATE. Remove all fuses.
Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Illustration 1 g01677315
Open door (4) to electronic control module (2). Disconnect harness assemblies (5) and (8).
Disconnect ground strap (1).
Remove bolts (3), the mounts, the spacers, and electronic control module (2).
If necessary, remove bolts (6) and bracket (7). Installation Procedure
Illustration 2 g01677315
If necessary, position bracket (7) and install bolts (6).
Install electronic control module (2), the spacers, the mounts, and bolts (3).
Connect grounding strap (1). Position ground strap (1) between the bolt head and the washer.
Connect harness assemblies (5) and (8) to electronic control module (2). Close door (4).
Connect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".