PLUG 5214269 - Caterpillar

Illustration 1 g02595442
Table 1
Specification for 251-2760 Upper Frame    
Item     Qty     Part     Specification Description    
Use 5P-0960 Grease Cartridge in order to coat all the pin bores before assembly.    
A     -     -     Clearance between the pin end and the side of the cab must be kept over
10.0 mm (0.39 inch).    
1     1     251-2542 Pin As     Diameter is
119.85 0.04 mm (4.718 0.002 inch).    
2     As required, use the following shims in order to adjust the maximum lateral clearance.
For Gosselies facility maximum lateral clearance is
1.0 mm (0.04 inch).
Except Gosselies facility maximum lateral clearance is
1.6 mm (0.06 inch).    
1 308-8784 Shim     Thickness is
0.5 mm (0.02 inch).    
2 308-8785 Shim     Thickness is
1.0 mm (0.04 inch).    
1 308-8786 Shim     Thickness is
2.0 mm (0.08 inch).    
3     As required, use the following shims in order to adjust the maximum lateral clearance to
1.0 mm (0.04 inch) for Gosselies facility.    
4 133-2427 Shim     Thickness is
0.5 mm (0.02 inch).    
2 308-8785 Shim     Thickness is
1.0 mm (0.04 inch).    
4     2     117-5435 Pin As     Diameter is
99.85 0.04 mm (3.931 0.002 inch).