PLUG 5F1474 - Caterpillar

Default Conditions for the Monitoring System
Table 3 contains the default conditions that cause an event code to be generated. Table 3 also contains a column that describes the system response when the conditions indicate that an abnormal operating condition exists.
Table 3
Default Conditions and System Response    
Event Code    Conditions which Generate this Code    System Response    
E017(1) High Engine Coolant Temperature Warning     The engine coolant temperature is above the trip point temperature for five seconds.     The code is active and the code is logged.    
E021(2) High Exhaust Temperature Derate     The exhaust temperature is above the trip point temperature for five seconds.     The code is active and the code is logged.
The ramp rate of derate is 2 percent per 15 seconds.
The maximum derate is 20 percent.    
E035(1) Loss of Coolant Flow Warning     The coolant flow switch opens.     The code is active and the code is logged.    
E038(1) Low Engine Coolant Temperature Warning     The coolant temperature is below the trip point temperature for five seconds.     The code is active and the code is logged.    
E072(1) Oil Level Low Mark     The oil level switch opens.     The code is active and the code is logged.    
E073(1) Oil Filter Differential Pressure High     The oil filter differential pressure is above the trip point temperature.
The warning for the oil filter differential pressure is determined by subtracting the filtered oil pressure from the unfiltered oil pressure.     The code is active and the code is logged.    
E074(1) Oil Filter Differential Pressure Very High    
E095(1) Fuel Filter Restriction Warning     The restriction across the fuel filter is greater than the trip point pressure. The fuel filter differential pressure switch opens.     The code is active and the code is logged.    
E098(1) Engine Prelube Override     The engine has started without completing the engine prelubrication.     The code is active and the code is logged.    
E100(1) Low Engine Oil Pressure Warning     The engine oil pressure is below a map-dependent value. The oil pressure is below this value for the delay time.     The code is active and the code is logged.    
E101(1) High Crankcase Pressure Warning     Engine crankcase pressure is above trip point pressure for the delay time.     The code is active and the code is logged.    
E190(1) Engine Overspeed Warning     The engine rpm has exceeded the trip point for engine overspeed for the delay time.     The code is active and the code is logged.    
E272(1) Inlet Air Restriction Warning     The inlet air restriction is above the trip point pressure for the delay time.     The code is active and the code is logged.    
E279(1) High Aftercooler Temperature Warning     The aftercooler temperature is above the trip point temperature for the delay time.     The code is active and the code is logged.    
E540(1) Low Engine Oil Refill Tank Level     The low engine oil