PLUG-PIPE 6L2279 - Caterpillar

Illustration 1 g00377046
Typical example (1) Impeller In order to install the impeller, the impeller must be at room temperature. Apply a thin coat of oil to the threads and the impeller face. Tighten the nut to the following torque in order to seat the impeller. ... 17 N m (13 lb ft) Loosen the nut. Apply 4C-9507 Retaining Compound to the nut. Install the nut and tighten the nut to the following torque. ... 3 N m (27 lb in) Additionally tighten the nut by the following value. ... 120 5 degrees (2) V-band clamps Tighten the V-band clamps to the following torque. ... 14.0 1.5 N m (10 1 lb ft) Gently hit around the V-band clamp with a soft faced hammer. Again tighten the V-band clamps to the following torque. ... 14.0 1.5 N m (10 1 lb ft) (3) Apply 5P-3931 Anti-Seize Compound on the washer face and the bolt threads before assembly. Tighten the bolts and nuts that hold the turbocharger to the exhaust manifold to the following torque. ... 55 10 N m (40 7 lb ft)