PLUG - CAM 6V6174 - Caterpillar

Illustration 1 g00841866
(A) 13 mm (0.5 inch) (B) 0.8 0.2 mm (0.03 0.01 inch) radius (C) chamfer that is 45° 1 0.5 mm (0.04 0.02 inch) (D) 85.5 0.1 mm (3.370 0.004 inch)The former 7D-7603 Thrust Washer can be machined to the dimensions of the new bearing. Refer to Illustration 1.The new bearing has a relief that is machined on the inside diameter of the bearing in order to improve service life. This relief will allow clearance for the splines on the axle shaft.
Illustration 2 g00843724
The new bearing (1) should be installed with the relief toward the splines (A) on the axle.