8P6363 PLUG Caterpillar parts
135H, 135H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 305, 527, 816F, 816F II, 824G II, 824H, 826G II, 826H, 834G, 834H, 836, 836H, 854G, 902, 906, 908, 914G, 920, 924F, 928F, 933, 933C, 939, 9...
Rating:
Alternative (cross code) number:
CA8P6363
8P-6363
8P6363
CA8P6363
8P-6363
8P6363
Weight: 0.02 pounds 0 kg.
Information:
OVERALL LENGTH
14
mm
OD
35
mm
COMPACT WHEEL LOADER, WHEEL LOADER,
Compatible equipment models: 8P6363:
Number on catalog scheme:
6
For full view, you need register
Information:
1. Remove bolt and washer (2), then remove treadle (1).
988B ONLY2. Remove four bolts, nuts, lockwashers and eight washers (3). Lower cover (4) from governor linkage housing under operator's station. This is for the 988B only. 3. Remove bolt and nut (6) from cable housing (7). Turn the cable housing to remove it from linkage housing (5). Slide the cable housing back on the cable and disconnect the cable from the linkage housing. 4. Loosen nut (8) and remove coupler (9) from cable. Remove nut (8) and cable housing (7). 5. Remove seal (10) from the cable housing. 6. Remove four bolts and lockwashers (11) from inside the cab. Housing can fall to the floor when the bolts are removed. 7. Remove linkage housing (5) and gasket from under the operator's station.Install Governor Pedal Group
1. Install gasket (1) and linkage housing (2) in machine as shown. Install four bolts and washers from inside the cab. 2. Install the seal in cable housing (3) with tooling (A). Install the seal with the lip of the seal toward the inside of the housing. Install seal until it is even with the face of the housing. 3. Install cable housing (3) on the cable, then install nut (4) and coupler to the cable. 4. Connect coupler (5) to plunger (6). Make sure the lever stop is adjusted to .28 in. (7.11 mm) (dimension B) before the connection is made. See Disassemble and Assemble Governor Pedal Group for the adjustment.5. Install cable housing (3) in the linkage housing. If the hole in the cable housing is not in alignment with the groove in the cable, then remove the cable housing and adjust the coupler on the cable. Tighten the nut on the cable and again connect the coupler to the plunger and install the cable housing.
988B ONLY6. Install bolts (7) through cable housing (3). The bolt must go through the groove in the cable. Install the nut to the bolt and tighten it.7. Lift the cover over the governor linkage housing under the operator's station. Install four nuts, bolts, lockwashers and eight washers. This is for the 988B only. 8. Install treadle (8) on splined shaft (9). Install the treadle so it makes an angle of 40° 4° (dimension A) with the floor. Install bolt and washer (10) in the end of shaft (9) and tighten it.Disassemble Governor Pedal Group
start by:a) remove governor pedal group 1. Remove cover (2) from linkage housing (1). 2. Remove spring (8) and three rings and pins (6). Remove plunger (5) and link (7). Remove ring and two washers (4), then remove lever (3). 3. Remove bearing (9) from the lever. 4. Remove roll pin (10) and remove link (11) from the plunger. 5. Remove O-ring seal (12) from body (13). Remove the body from the housing and remove another seal from the body. 6. Remove plug (14) from the housing. Remove ring and washer (15) from the shaft. 7. Remove the bolt from lever (18)
988B ONLY2. Remove four bolts, nuts, lockwashers and eight washers (3). Lower cover (4) from governor linkage housing under operator's station. This is for the 988B only. 3. Remove bolt and nut (6) from cable housing (7). Turn the cable housing to remove it from linkage housing (5). Slide the cable housing back on the cable and disconnect the cable from the linkage housing. 4. Loosen nut (8) and remove coupler (9) from cable. Remove nut (8) and cable housing (7). 5. Remove seal (10) from the cable housing. 6. Remove four bolts and lockwashers (11) from inside the cab. Housing can fall to the floor when the bolts are removed. 7. Remove linkage housing (5) and gasket from under the operator's station.Install Governor Pedal Group
1. Install gasket (1) and linkage housing (2) in machine as shown. Install four bolts and washers from inside the cab. 2. Install the seal in cable housing (3) with tooling (A). Install the seal with the lip of the seal toward the inside of the housing. Install seal until it is even with the face of the housing. 3. Install cable housing (3) on the cable, then install nut (4) and coupler to the cable. 4. Connect coupler (5) to plunger (6). Make sure the lever stop is adjusted to .28 in. (7.11 mm) (dimension B) before the connection is made. See Disassemble and Assemble Governor Pedal Group for the adjustment.5. Install cable housing (3) in the linkage housing. If the hole in the cable housing is not in alignment with the groove in the cable, then remove the cable housing and adjust the coupler on the cable. Tighten the nut on the cable and again connect the coupler to the plunger and install the cable housing.
988B ONLY6. Install bolts (7) through cable housing (3). The bolt must go through the groove in the cable. Install the nut to the bolt and tighten it.7. Lift the cover over the governor linkage housing under the operator's station. Install four nuts, bolts, lockwashers and eight washers. This is for the 988B only. 8. Install treadle (8) on splined shaft (9). Install the treadle so it makes an angle of 40° 4° (dimension A) with the floor. Install bolt and washer (10) in the end of shaft (9) and tighten it.Disassemble Governor Pedal Group
start by:a) remove governor pedal group 1. Remove cover (2) from linkage housing (1). 2. Remove spring (8) and three rings and pins (6). Remove plunger (5) and link (7). Remove ring and two washers (4), then remove lever (3). 3. Remove bearing (9) from the lever. 4. Remove roll pin (10) and remove link (11) from the plunger. 5. Remove O-ring seal (12) from body (13). Remove the body from the housing and remove another seal from the body. 6. Remove plug (14) from the housing. Remove ring and washer (15) from the shaft. 7. Remove the bolt from lever (18)
Cat SIS web machinery list:
Parts plug Caterpillar catalog:
561H, 578, 583R, 587R, 589, 916, 926, 936, 936F, D10N, D10R, D11N, D11R, D6K2, D6K2 LGP, D8L, D8R, D9L, D9N, D9R, G936
375, 375 L, 44, 5080, 518, 528, 578, 613, 613B, 631C, 641B, 650B, 651E, 657B, 657E, 769, 772, 773, 814, 815, 816, 910, 920, 930, 950, 955C, 955H, 966C, 977H, 980, 980B, 983, CS-643, D8N, D9G, D9H
16, 518, 528, 561B, 583H, 621, 621B, 621E, 621F, 623, 623E, 627, 627B, 627E, 627F, 631C, 631E, 637, 637D, 637E, 641, 641B, 650B, 651, 657, 657B, 666, 768B, 769, 772, 773, 814, 815, 834, 941, 950, 951B...
561D, 571G, 572G, 583K, D5, D5B, D5E, D6C, D6D, D6E SR, D7G, D7G2, D8H, D8K, D9H
153, 163, 172, 173B, 183B, 191, 613, 613B, 615, 630B, 631D, 631E, 631G, 633, 633C, 633D, 637E, 637G, 650B, 651, 651E, 657E, 657G, 768B, 769, 769C, 769D, 771C, 771D, 772, 772B, 773, 773B, 773D, 775B, 7...
583R, 963C, 973, D8R, D8R II, D8T, D9R
572G, 594H, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2, D8H, D8K, D9G, D9H
623B, 950, 951, 966C, 977H, 977K, 977L, 980B, 988
613, 920, 930, 941, 950, 951B, 955H, 955K, 955L, 966C, 977K, 980
561D, 941, 951B, 955K, 955L, D10R, D4D, D4E, D5, D5B
24H, 5110B, 5130, 5130B, 5230, 5230B, 631E, 631G, 633E II, 637D, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 784B, 784C,...
525B, 525D, 535B, 535D, 545, 545D, 555D, 611, 613C II, 615C, 725, 730, 735, 740, 770, 772, 772G, 772G OEM, 797, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 844, 844H, 844K, 854G, 854K, 950G, 95...
2374072
PLUG
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2374071
PLUG
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1741037
PLUG
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2080976
PLUG
TL3 530, TL4 24
TL3 530, TL4 24
216, 216B, 216B3, 226B, 226B3, 228, 232B, 242B, 242B3, 247, 247B, CB-44B, CB-54B, CD-54B
3072671
PLUG AS
120H, 12H, 12M 2, 12M 3, 12M 3 AWD, 135H, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16M, 235B, 24M, 2864C, 3126, 3126B, 3126E, 3176B, 3176C, 3196, 322C, 324D ...
120H, 12H, 12M 2, 12M 3, 12M 3 AWD, 135H, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16M, 235B, 24M, 2864C, 3126, 3126B, 3126E, 3176B, 3176C, 3196, 322C, 324D ...
2327599
PLUG
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2670C, 3054C, 3054E, 312E, 312E L, 314E CR, 314E LCR, 315C, 316E L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR,...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2670C, 3054C, 3054E, 312E, 312E L, 314E CR, 314E LCR, 315C, 316E L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR,...
2327597
PLUG
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2670C, 3054C, 3054E, 312E, 312E L, 314E CR, 314E LCR, 315C, 316E L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR,...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2670C, 3054C, 3054E, 312E, 312E L, 314E CR, 314E LCR, 315C, 316E L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR,...
2327596
PLUG
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2670C, 3054C, 3054E, 312E, 312E L, 314E CR, 314E LCR, 315C, 316E L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR,...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2670C, 3054C, 3054E, 312E, 312E L, 314E CR, 314E LCR, 315C, 316E L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR,...
2258858
PLUG
120M, 12M, 2470C, 3054C, 3054E, 315C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 414E, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 442D, 442E, 444E, ...
120M, 12M, 2470C, 3054C, 3054E, 315C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 414E, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 442D, 442E, 444E, ...
2256524
PLUG-CUP
120M, 120M 2, 12M, 2384C, 2484C, 2570C, 2670C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 316E L, 318D2 L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320...
120M, 120M 2, 12M, 2384C, 2484C, 2570C, 2670C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 316E L, 318D2 L, 318E L, 320D GC, 320D L, 320D2, 320D2 GC, 320...
2256522
PLUG-CUP
2470C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315C, 318D2 L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, ...
2470C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315C, 318D2 L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, ...