PLUG-CONNECTOR 8T8733 - Caterpillar

Working with electrical circuits is hazardous and exposes personnel to electrical potential. To ensure safe operation, personnel must be trained in proper operating procedures. Bodily contact with electrical potential will cause serious personal injury or death.
High voltage may be present. Work on this equipment must be performed by authorized trained personnel. Failure to disconnect the power source before performing maintenance or removing modules exposes personnel to electrical potential. Bodily contact with electrical potential will cause serious personal injury or death.
Installation compliance with all local, state, and regional electrical codes and ordinances must be completed by a qualified person. The qualified person must be trained and certified in the installation of the UPS. Only trained personnel should operate the UPS.
UPS Isolation for a Single UPS
To isolate the UPS from the source of electricity and supply the load directly by the normal or bypass AC source, follow the instructions below.
Press any button to exit sleep mode.Note: If there is nothing displayed on the screen, the display may have entered sleep mode. Sleep mode is activated after a period of nonuse to lengthen the service