9D3737 PLUG-BUTTON Caterpillar parts
120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 235, 245, 24M, 272C, 297C, 299C, 307B, 312C, 315C, 318C, 3508, 3508B, 3512, 3512B, 3516, 3516B, 621, 623, 627, 641B, 657B, 69D, 725, 730...
Rating:
Alternative (cross code) number:
CA9D3737
9D-3737
9D3737
CA9D3737
9D-3737
9D3737
Weight: 0.01 pounds 0 kg.
Information:
DOME HEIGHT
1.98
mm
PLUG HEIGHT
9.91
mm
PLUG OD
13.5
mm
PLUGGED HOLE DIAMETER
11.5
mm
ARTICULATED TRUCK, WHEEL TRACTOR,
Compatible equipment models: 9D3737:
COMPACT TRACK LOADER
299C
EJECTOR TRUCK
740
FELLER BUNCHER
FB518
MINI HYD EXCAVATOR
307B
MULTI TERRAIN LOADER
297C
SKID STEER LOADER
272C
TRUCK
69D
769D
773D
773E
775E
777D
785
785B
785C
785D
789
789B
789C
789D
793C
793D
793F
793F AC
793F CMD
793F OEM
793F XQ
795F AC
795F XQ
797
797B
797F
Number on catalog scheme:
45
For full view, you need register
Information:
Start By:
Connect the steering frame lock. Refer to the Service Manual module Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.Upper Pin (C Pin)
Perform the following steps in order to remove the upper pin assembly.
Illustration 1 g00992973
Illustration 2 g00992988
Attach a suitable lifting device and Tooling (A) to lever assembly (1). Refer to Illustration 1. Attach the hook of Tooling (A) to link assembly (1) with a suitable lifting device. The weight of lever assembly (1) with a removed pin assembly (2) is approximately 220 kg (480 lb).
Remove bolts (3) and the washers.
Remove plate (4) .
Illustration 3 g00993014
Install Tooling (B) to pin assembly (2). The weight of Tooling (B) is approximately 115 kg (250 lb).
Illustration 4 g00993047
Attach a suitable lifting device to the double acting cylinder. Pull pin assembly (2) out of the bore approximately 175 mm (7.0 inch).
Illustration 5 g00993133
Install another suitable lifting device to Tooling (B) .
Pull pin assembly (2). Remove pin assembly (2) from Tooling (B). The weight of pin assembly (2) is approximately 60 kg (130 lb).Lower Pin (B Pin)
Perform the following steps in order to remove the lower pin assembly from the right side of the work tool.
Illustration 6 g00993380
Remove bolts (6) and washers.
Remove plate (7) .
Illustration 7 g00993382
Install Tooling (C) to pin assembly (5). The weight of Tooling (C) is approximately 95 kg (210 lb).
Pull pin assembly (5) out of the bore approximately 175 mm (7.0 inch).
Illustration 8 g00993384
Install another suitable lifting device to Tooling (C) .
Remove pin assembly (5). At this time, the shims will also be removed.Note: Mark the shims and the location of the shims for assembly.
Remove pin assembly (5) from Tooling (C). The weight of pin assembly (5) is approximately 60 kg (130 lb).
Perform Step 1 through Step 7 in order to remove the lower pin assembly from the other side of the work tool.
Lower the link assembly (1) in order to clear the work tool at removal. When the upper pin assembly and the two lower pin assemblies are removed, separate the steering frame lock. Start the engine and move the machine away from the work tool.
Illustration 9 g00993648
Turn the engine start switch to the OFF position. Raise link assembly (1). Use a cable and cable clamps in order to tie the link assembly to the lever and bearing assembly.
Remove Tooling (A) and the suitable lifting device.
Connect the steering frame lock. Refer to the Service Manual module Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.Upper Pin (C Pin)
Perform the following steps in order to remove the upper pin assembly.
Illustration 1 g00992973
Illustration 2 g00992988
Attach a suitable lifting device and Tooling (A) to lever assembly (1). Refer to Illustration 1. Attach the hook of Tooling (A) to link assembly (1) with a suitable lifting device. The weight of lever assembly (1) with a removed pin assembly (2) is approximately 220 kg (480 lb).
Remove bolts (3) and the washers.
Remove plate (4) .
Illustration 3 g00993014
Install Tooling (B) to pin assembly (2). The weight of Tooling (B) is approximately 115 kg (250 lb).
Illustration 4 g00993047
Attach a suitable lifting device to the double acting cylinder. Pull pin assembly (2) out of the bore approximately 175 mm (7.0 inch).
Illustration 5 g00993133
Install another suitable lifting device to Tooling (B) .
Pull pin assembly (2). Remove pin assembly (2) from Tooling (B). The weight of pin assembly (2) is approximately 60 kg (130 lb).Lower Pin (B Pin)
Perform the following steps in order to remove the lower pin assembly from the right side of the work tool.
Illustration 6 g00993380
Remove bolts (6) and washers.
Remove plate (7) .
Illustration 7 g00993382
Install Tooling (C) to pin assembly (5). The weight of Tooling (C) is approximately 95 kg (210 lb).
Pull pin assembly (5) out of the bore approximately 175 mm (7.0 inch).
Illustration 8 g00993384
Install another suitable lifting device to Tooling (C) .
Remove pin assembly (5). At this time, the shims will also be removed.Note: Mark the shims and the location of the shims for assembly.
Remove pin assembly (5) from Tooling (C). The weight of pin assembly (5) is approximately 60 kg (130 lb).
Perform Step 1 through Step 7 in order to remove the lower pin assembly from the other side of the work tool.
Lower the link assembly (1) in order to clear the work tool at removal. When the upper pin assembly and the two lower pin assemblies are removed, separate the steering frame lock. Start the engine and move the machine away from the work tool.
Illustration 9 g00993648
Turn the engine start switch to the OFF position. Raise link assembly (1). Use a cable and cable clamps in order to tie the link assembly to the lever and bearing assembly.
Remove Tooling (A) and the suitable lifting device.
Cat SIS web machinery list:
Parts plug Caterpillar catalog:
572G, 594H, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2, D8H, D8K, D9G, D9H
D10R, D10T, D10T2, D9R, D9T
623B, 950, 951, 966C, 977H, 977K, 977L, 980B, 988
613, 920, 930, 941, 950, 951B, 955H, 955K, 955L, 966C, 977K, 980
24H, 5110B, 5130, 5130B, 5230, 5230B, 631E, 631G, 633E II, 637D, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 784B, 784C,...
525B, 525D, 535B, 535D, 545, 545D, 555D, 611, 613C II, 615C, 725, 730, 735, 740, 770, 772, 772G, 772G OEM, 797, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 844, 844H, 844K, 854G, 854K, 950G, 95...
650B, 69D, 768B, 769, 769C, 769D, 771C, 771D
518, 528, 613, 613B, 814, 815, 950, 966C
621
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374F L, 568 FM LL, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777B, 777C, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 135H, 135H NA, 140H, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 16M, 320 L, 320N, 322, ...
793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 797
3157700
PLUG
236B3, 242B3, 246C, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
236B3, 242B3, 246C, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
1329257
PLUG
AP-1055D, AP-600D, AP-655D, AP-900B, AP555E, BG500E, BG600D, BG655D, RM-250C, RM-300, RM-500, RR-250B, TH210, TH215
AP-1055D, AP-600D, AP-655D, AP-900B, AP555E, BG500E, BG600D, BG655D, RM-250C, RM-300, RM-500, RR-250B, TH210, TH215
2323861
PLUG
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
1526145
PLUG-MAGNETIC
450E, 450F, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, CP-433E, CS-323C, CS-423E, CS-44, TH210, TH215
450E, 450F, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, CP-433E, CS-323C, CS-423E, CS-44, TH210, TH215
2113414
PLUG
TH210, TH215
TH210, TH215
2111481
PLUG
424B, 424B HD, CP-433E, CP-44, CS-423E, CS-433E, CS-44, TH210, TH215
424B, 424B HD, CP-433E, CP-44, CS-423E, CS-433E, CS-44, TH210, TH215
0997197
PLUG
256C, 262C, 272C, 277C, 287C, 297C, 301.5, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 311, 311B, 312, 315, 317, E11...
256C, 262C, 272C, 277C, 287C, 297C, 301.5, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 311, 311B, 312, 315, 317, E11...
2601846
PLUG
256C, 262C, 272C, 277C, 287C, 297C, HM312, HM315, HM415B, HM825, MD-250
256C, 262C, 272C, 277C, 287C, 297C, HM312, HM315, HM415B, HM825, MD-250
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 246C, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B3, 259B3, 262C, 262C2, 272C, 272D, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 2...
120H, 120K, 120K 2, 12H, 12K, 135H, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H, 216B3, 226B3, 236B3, 236D, 242B3, 242D, 246C, 246D, 2470C, 247B3, 24H, 252B3, 256C, 2570C, 257B3, 257D, 259B3,...
2584173
PLUG AS-CONNECTOR
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
2584172
PLUG AS-CONNECTOR
216B3, 226B3, 236B3, 236D, 242B3, 242D, 246C, 246D, 247B3, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C...
216B3, 226B3, 236B3, 236D, 242B3, 242D, 246C, 246D, 247B3, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C...