PLUG-DRAIN 9J7031 - Caterpillar

REBE1445-00
22Nov2006
U-752
A-719
Before/After
PRODUCT SUPPORT PROGRAM FOR REMOVING SPACER FROM THE AUTOMATIC TIMING ADVANCE ON CERTAIN 3412C GENERATOR SETS
1288 PS42292
This Program must be administered either before or after failure.In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42292" as the Part Numberand "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
30Nov2008
PROBLEM
A spacer was incorrectly assembled into the automatic timing advance on certain 3412C generator sets.
AFFECTED PRODUCT
Model Identification Number
3412C DJN01252-01253, 1259, 1265, 1268, 1290-1291
PARTS NEEDED
No parts needed for this program
ACTION REQUIRED
Refer to SEBU7125 Operations and Maintenance Manual for safety precautions prior to starting repairs.
Refer to RENR1389 Disassembly and Assembly Manual, Automatic Timing Advance. Remove the 123-6010 Spacer from the drive group (Image 1). Correct configuration is shown in Image 2.
Image1
Image2
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-20000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
removed java code "affectDisposition"commented on Chints October 12 2006 Chints w.r.t CM000343756-->
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.