PLUG 9K2223 - Caterpillar

Illustration 1 g00283182
(1) Torque for the twenty-four bolts ... 300 40 N m (220 30 lb ft) (2) (3) Apply 1U-8846 Liquid Gasket to the contacting surfaces prior to assembly. (4) Torque for the twenty-four bolts ... 300 40 N m (220 30 lb ft) (5) Torque for the plug ... 45 6 N m (33 4 lb ft) (6) At assembly, rubber toric seals must be clean and dry and all surfaces that contact rubber toric seals must be clean and dry. Immediately before installation, apply a thin layer of oil on the surfaces of the metal seals that contact the rubber toric seals. The seal must be assembled square with the bore. Rubber toric seals must not have bulged and these seals must also not have twisted. (7) Torque for the gauge assembly ... 45 6 N m (33 4 lb ft) (8) For additional information on the axle housing and bearings, refer to the Service Manual module for Testing and Adjusting, "Axle Housing and Bearing Preload - Adjust" for the machine that is being serviced. (9) Apply 1U-8846 Liquid Gasket to the contacting surfaces prior to assembly. (10) Torque for the four bolts ... 570 80 N m (420 60 lb ft) (11) (12) Apply 1U-8846 Liquid Gasket to the contacting surfaces prior to assembly.
Illustration 2 g00290383
Detail A
Illustration 3 g00290384
Detail B (13) Outside diameter of the pinion housing ... 174.50 0.08 mm (6.870 .003 inch) (14) Sleeve Bearing Inside diameter of the sleeve bearing ... 175.41 0.13 mm (6.906 .005 inch) Outside diameter of the sleeve bearing ... 187.81 0.08 mm (7.394 .003 inch) (15) Inside diameter of the trunnion support ... 187.33 0.05 mm (7.375 .002 inch)
Illustration 4 g00290385
Detail C (16) Outside diameter of the trunnion ... 126.80 0.08 mm (4.992 .003 inch) (17) Sleeve Bearing Inside diameter of the sleeve bearing ... 127.80 0.10 mm (5.032 .004 inch) Outside diameter of the sleeve bearing ... 140.20 0.10 mm (5.520 .004 inch) (18) Inside diameter of the trunnion support ... 139.75 0.05 mm (5.502 .002 inch)
Illustration 5 g00290386
Right Side View (19) Torque for the eight bolts ... 530 70 N m (390 50 lb ft) (20) Torque for the six bolts ... 300 40 N m (220 30 lb ft) (21) Torque for the twelve bolts ... 300 40 N m (220 30 lb ft) (22) Torque for the twelve bolts ... 300 40 N m (220 30 lb ft)
Illustration 6 g00290387
Front View (23) Torque for the two air purge screws ... 11 4 N m (8 3 lb ft) (24) Torque for the pressure relief fitting ... 13 4 N m (10 3 lb ft) (25) Torque for the plug ... 75 7 N m (55 5 lb ft)