PLUG-THRD & 9U7108 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 1192921 SEAL GP-CSHFACTION REQUIRED
See the attached Rework Procedure.SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts Labor Hrs Parts Labor Hrs Parts Labor Hrs
3126, 3126B, and C-9 On-HighwayTruck Engines
Using the followinglabor codes:1160-010 remove and install 1.6 hrs1160-074 wash .3 hrs1160-030 test after .3 hrsTotal 2.2 hrs
0-24 mos 100% 2.2 0 0 0 0
525B, 950G, 322C L, and325C L engines
0-24 mos 100% 5.9 0 0 0 0
This is a 2.2?hr job for on-highwaytruck engines.
This is a 5.9-hr job for engines in525B, 950G, and 325C L.PARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.
Attach. (1-Rework Procedure)Rework Procedure
Remove PTO adapter or pulley if applicable.
Remove Damper.
Remove V-belt (if applicable)
Remove trunion and front support from C-9.
Remove crank pulley.
Verify that seal is pressed between 2mm and 4mm.If not,
a. Remove seal.i. To remove seal, cock to one side thenpull forward.b. Install new seal using the installation tool.
Reinstall crank pulley. Torque with star pattern.
Reinstall trunion and front support if applicable.
Reinstall V-belt (if applicable).
Reinstall damper (if applicable). Torque withstar pattern, and retorque in sequential order.
Reinstall damper pulley (PTO).