PLUNGER AS 1905858 - Caterpillar

Install tube assembly (39) to the rail assembly. Install a bolt (38) and a clamp to the rail assembly.
Illustration 17 g00571175
Illustration 18 g00571176
Install tube assembly (36) to torque converter (3) and coupling (37) .
Illustration 19 g00571174
Connect harness assembly (34) to liquid level sensor (35) .
Illustration 20 g00571152
Connect harness assembly (33) to switch assembly (32) .
Connect harness assembly (31) to switch assembly (30) . Install nuts (29) to switch assembly (30) .
Illustration 21 g00571151
Connect harness assembly (27) to transmission input speed sensor (28) .
Connect harness assembly (25) to manifold (26) .
Illustration 22 g00571149
Use a suitable lifting device (not shown) to position filter base (20) onto torque converter (3) .
Install bolts (24) to secure filter base (20) to torque converter (3) .
Install nuts (23) and install harness assembly (22) to switch assembly. The weight of filter base (20) is approximately 85 kg (189 lb).
Illustration 23 g00571148
Install bolt (21) to secure harness assembly (22) to filter base (20) . Connect hose assembly (19) to filter base (20) .
Illustration 24 g00571147
Connect hose assemblies (16) , (17) , and (18) to torque converter (3) .
Illustration 25 g00571146
Connect hose assembly (15) to manifold (14) .
Illustration 26 g00571145
Connect hose assembly (12) to manifold (13) .
Illustration 27 g00571143
Illustration 28 g00571144
Connect hose assembly (9) to gear pump (10) . Install bolt (11) and a clip.
Illustration 29 g00571141
Connect hose assembly (8) to gear pump (7) .
Illustration 30 g00571138
Connect tube assembly (6) to the gear pump (7) .
Fill torque converter (3) with recommended lubricant. Refer to Operation and Maintenance Manual, "Recommended Fluids and Refill Capacities".End By:
Install the fuel tank. Refer to Disassembly and Assembly, "Fuel Tank - Install".
Install the drive shaft assembly. Refer to Disassembly and Assembly, "Drive Shaft- Remove and Install".