PLUNGER 2055865 - Caterpillar

2055865 PLUNGER Caterpillar parts 3003, 301.5

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2055865
205-5865
2055865

Weight: 0.07 pounds 0 kg.

Buy PLUNGER 2055865 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE, MINI HYD EXCAVATOR,

Compatible equipment models: 2055865:

INDUSTRIAL ENGINE 3003

MINI HYD EXCAVATOR 301.5 Caterpillar

Number on catalog scheme: 8

Caterpillar 2055865 Parts scheme PLUNGER

For full view, you need register

Information:

Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove bolts (18) and head assembly (3).
Illustration 7 g02868857
Remove plunger (19) and spring (20) from head assembly (3).
Remove O-ring seals (21) and plate (23) from pump head (3).
Remove piston (22).
Illustration 8 g02869016
If necessary, remove cylinder (24) and guide (25) from head assembly (3).
Remove bearing cup (26).
Illustration 9 g02869116
Illustration 10 g02869143
Remove O-ring seal (27) from housing assembly (29).
Remove bearing cone (28) and shim (30).
Illustration 11 g02869918
Remove rotating group (31) from pump housing (29).
Illustration 12 g02870096
Illustration 13 g02870158
Remove retainer (32), piston assemblies (33), and bearing (35) from barrel assembly (34).
Illustration 14 g02870217
Illustration 15 g06139297
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: There is spring force against retaining ring (36). When retaining ring (36) is removed, the spring force will be released. Removal of the internal assembly components in barrel assembly (34) should be performed in a press.
Use Tooling (A) and a suitable press to compress the spring in barrel assembly (34).
Remove retaining ring (36), spring (39), guide (38), and pins (37) from barrel assembly (34).
Illustration 16 g02870336
Remove swashplate assembly (40) from pump housing (29).
Remove shaft assembly (41) from pump housing (29).
Illustration 17 g02870479
Use Tooling (B) and a suitable press to remove bearing cone (42) from shaft assembly (41).
Illustration 18 g02870459
Remove swashplate bearings (43) from pump housing (29).
Remove bearing cup (44) from pump housing (29).
Illustration 19 g02871418
Remove retaining ring (45) and lip seal (46).