PLUNGER 7V5323 - Caterpillar

Table 1
Required Parts
Item Qty New Part Number Part Name Former Part(1)
1 1 495-4895 Hose 495-4896
2 1 343-2390 Clip 3U-2428
3 1 148-8312 Adapter As -
(1) The former part number listed is for reference only and may differ.Note: For 495-4895 Hose cut from bulk 415-6334 Hose.Rework Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Illustration 1 g06360929
(A) Blank plug
(B) 090-0744 Elbow
(1) 495-4895 Hose
(2) 343-2390 Clip
(3) 148-8312 Adapter As
Reroute the new hose (1) to a spare port at the front of engine oil cooler and connect using elbow (B) and adapter (3), as shown in Illustration 1.Note: Retain the 090-0744 Elbow from 495-4896 Hose.
Secure hose (1) using clip (2), as shown in Illustration 1.
Use blanking plug (A) removed from front of the cooler to blank port at rear of cooler, shown in Illustration 1.